Manual

46
©
2023 DJI All Rights Reserved.
DJI Mini 3 Pro
User Manual
1. Notications
Tap to check system notications.
2. System Settings
Tap to access system settings and congure the Bluetooth, volume, network, etc. You can also view
the Guide to learn more about the controls and status LEDs.
3. Shortcuts
: Tap to enable or disable Wi-Fi. Hold to enter settings and then connect to or add a Wi-Fi
network.
: Tap to enable or disable Bluetooth. Hold to enter settings and connect with nearby Bluetooth
devices.
: Tap to enable Airplane mode. Wi-Fi and Bluetooth will be disabled.
: Tap to turn o system notications and disable all alerts.
: Tap to start recording the screen.
: Tap to take a screenshot. The function will be available only after a microSD card is inserted into
the microSD slot on the remote controller.
4. Adjusting Brightness
Slide the bar to adjust the screen brightness.
5. Adjusting Volume
Slide the bar to adjust the volume.
Advanced Features
Calibrating the Compass
The compass may need to be calibrated after the remote controller is used in areas with electromagnetic
interference. A warning prompt will appear if the compass of the remote controller requires calibration.
Tap the warning prompt to start calibrating. In other cases, follow the steps below to calibrate your
remote controller.
1. Power on the remote controller, and enter Quick Settings.
2. Tap to enter system settings, scroll down and tap Compass.
3. Follow the on-screen instructions to calibrate the compass.
4. A prompt will be displayed when the calibration is successful.