Manual
22
©
2023 DJI All Rights Reserved.
DJI Mini 3 Pro
User Manual
3. Tap the shutter/record button to take photos or start recording. View the footage in Playback.
Exiting FocusTrack
Tap Stop in DJI Fly or press the Flight Pause button once on the remote controller to exit FocusTrack.
DO NOT use FocusTrack in areas with people and animals running or vehicles moving.
DO NOT use FocusTrack in areas with small or thin objects (e.g., tree branches or power lines),
transparent objects (e.g., water or glass), or monochrome surfaces (e.g., white walls).
Operate the aircraft manually. In an emergency, press the Flight Pause button or tap Stop in DJI Fly.
Be extra vigilant when using FocusTrack in any of the following situations:
a) The tracked subject is not moving on a level plane.
b) The tracked subject changes shape drastically while moving.
c) The tracked subject is out of sight for an extended period.
d) The tracked subject is moving on a snowy surface.
e) The tracked subject has a similar color or pattern to its surrounding environment.
f) The lighting is extremely dark (<300 lux) or bright (>10,000 lux).
Make sure to follow local privacy laws and regulations when using FocusTrack.
It is recommended to only track vehicles and people (but not children). Fly with caution when
tracking other subjects.
In supported moving subjects, vehicles refer to cars and small to medium-sized yachts.
Do not track a remotely controlled model car or boat.
The tracking subject may be inadvertently swapped to another subject if they pass nearby each
other.
FocusTrack is disabled when using a wide-angle lens or ND lter.
In Photo mode, FocusTrack is only available when using Single.
FocusTrack is disabled when recording at a high resolution such as 1080p 48/50/60/120 fps,
2.7K 48/50/60 fps, or 4K 48/50/60 fps.
When lighting is insucient and the vision systems are unavailable, Spotlight and POI can still be
used for static subjects, but there will not be obstacle avoidance. ActiveTrack can not be used.
FocusTrack is unavailable when the aircraft is on the ground.
FocusTrack may not function properly when the aircraft is ying near ight limits or in a GEO Zone.
2. Drag-select the subject in the camera view or enable Subject Scanning under Control settings in DJI
Fly Control and tap the recognized subject to enable FocusTrack. The default mode is Spotlight. Tap
the icon to switch between Spotlight, ActiveTrack, and POI. Tap GO to start FocusTrack.