User's Guide

13
Installation and Connection
1. It is recommended to use the Power Distribution Unit, USB 3.0 Hub
included and an optional Manifold 2 Mini Network Switch with the Manifold
2, and assemble them as shown using the Assembly Bar Set.
2. When using with DJI flight platforms, mount the Manifold 2 and other
external devices to the flight platform using a compatible mounting bracket.
The size of the screw holes on the Manifold 2 is M2.5 with a thread
depth of 5 mm. The size of the screw holes on the accessories is
M2.5 with a thread depth of 3.5 mm. DO NOT use screws that are
too long to avoid damage to the inner components.
3. Connection:
When using with the A3 or N3 flight controller or the M600 series flight
platforms, connect the API port on the flight controller to the UART port on
the Manifold 2. Make sure to use the UART Cable for A3/N3 Flight Controller
included.