User manual
DJI Mavic 3 User Manual
83
©
2022 DJI All Rights Reserved.
Original Instructions
This manual is provided by SZ DJI Technology, Inc., and the content is subject to change.
Address: 14th Floor, West Wing,
Skyworth Semiconductor Design Building, No 18 Gaoxin South 4th Ave, Nanshan District, Shenzhen,
China, 518057.
FAR Remote ID Compliance Information
The aircraft complies with the requirements of 14 CFR Part 89:
• The aircraft automatically broadcasts Remote ID messages from takeo to shut down. An external
device such as a cell phone or tablet is required to be connected as a location source to DJI mobile
devices without an integrated GNSS system [1], and must run the DJI ight control app such as
DJI Fly in the foreground and always allow the DJI ight control app to obtain its accurate location
information. The connected external device must minimally be one of the following:
1) FCC Certied personal wireless device that uses GPS with SBAS (WAAS) for location services; or
2) FCC Certied personal wireless device with integrated GNSS.
Also, the external device must be operated in a way that does not interfere with the location reported
and its correlation to the operator location.
• The aircraft automatically initiates a pre-ight self-test (PFST) of the Remote ID system before takeo
and cannot take off if it does not pass the PFST [2]. The results of the PFST of the Remote ID
system can be viewed in either a DJI ight control app such as DJI Fly or DJI goggles.
• The aircraft monitors the Remote ID system functionality from pre-ight to shut down. If the Remote
ID system malfunctions or has a failure, an alarm will be displayed in either a DJI ight control app
such as DJI Fly or DJI goggles.
Footnotes
1. DJI mobile devices without an integrated GNSS system such as DJI RC-N1, DJI FPV Goggles V2,
and DJI Goggles 2.
2. The pass criterion for PFST is that the hardware and software of the Remote ID required-data source
and transmitter radio in the Remote ID system are functioning properly.
After-Sales Information
Visit https://www.dji.com/support to learn more about after-sales service policies, repair services, and
support.