User manual
DJI Mavic 3 User Manual
80
©
2022 DJI All Rights Reserved.
Direct Remote ID
1. Transport Method: Wi-Fi Beacon
2. Method of uploading the UAS Operator Registration Number to the aircraft: Enter DJI Fly > Safety >
UAS Remote Identication, and then upload UAS Operator Registration Number.
List of Items, including qualied accessories
1. DJI Mavic 3 V2.0 Low-Noise Propellers (Model: 9453F, 8.5g)
2. DJI Mavic 3 V2.0 ND Filters Set (ND 4/8/16/32/64/128/256/512) (2.3 g)
3. DJI Mavic 3 V2.0 Intelligent Flight Battery (Model: BWX260-5000-15.4, 335.5 g)
List of Spare and Replacement Parts
1. DJI Mavic 3 V2.0 Low-Noise Propellers (Model: 9453F)
2. DJI Mavic 3 V2.0 Intelligent Flight Battery (Model: BWX260-5000-15.4)
Remote Controller Warnings
The remote controller indicator will glow red after disconnecting from the aircraft for more than two seconds.
DJI Fly will prompt a warning after disconnecting from the aircraft for more than 4.5 seconds.
The remote controller will beep and power off automatically after disconnecting from the aircraft or
without operation for a long time.
Avoid interference between the remote controller and other wireless equipment. Make sure to turn o
the Wi-Fi on nearby mobile devices. Land the aircraft as soon as possible if there is interference.
DO NOT operate the aircraft if lighting conditions are too bright or dark when using a mobile phone
to monitor the ight. Users are responsible for correctly adjusting the display brightness when using
the monitor in direct sunlight during ight operation.
Release the control sticks or press the ight pause button if an unexpected operation occurs.
GEO Awareness
GEO Awareness contains the features listed below.
UGZ (Unmanned Geographical Zone) Data update: user can update the y safe data through GPS by
using the data update feature and store the data in the aircraft.
GEO Awareness Map Drawing: after the latest UZG data is updated, a ight map with a restricted zone
will be displayed in the DJI Fly app. Name, eective time, height limit, etc., can be viewed by tapping the
area.
GEO Awareness Pre-Warning: the app will prompt the user with warning information when the aircraft
is near or in a restricted area, the horizontal distance is less than 160 m, or the vertical distance is less
than 40 m from the zone to remind the user to y with caution.
AGL (Above Ground Level) Statement
The vertical part of ‘‘Geo-awareness’’ may use the AMSL altitude or the AGL height. The choice
between these two references is specied individually for each UGZ. Neither AMSL altitude nor the AGL
height is supported by DJI Mavic 3 V2.0. The height H appears in the DJI Fly app camera view, which is
the height from the aircraft takeo point to the aircraft. The height above the takeo point may be used
as an approximation but may dier more or less from the given altitude/height for a specic UGZ. The
remote pilot remains responsible for not breaching the vertical limits of the UGZ.