User manual

DJI Mavic 3 User Manual
62
©
2022 DJI All Rights Reserved.
Battery: Tap to view the battery information such as battery cell status, serial number and times charged.
Auxiliary LED: Tap to set the auxiliary LED to auto, on, or o. Do not turn on the Auxiliary LED before takeo.
Aircraft Front Arm LEDs: In auto mode, the aircraft front LEDs will be disabled during recording to ensure the
quality is not aected.
Unlock GEO Zone: Tap to view the information about unlocking GEO zones.
The Find My Drone feature helps to nd the location of the aircraft on the ground.
Advanced Safety Settings include the behavior settings of the aircraft when the remote controller signal is
lost, when the propellers can be stopped during ight, and the AirSense switch.
The behavior of the aircraft when the remote controller signal is lost can be set to Return to Home, Descend,
and Hover.
“Emergency Only” indicates that the motors can only be stopped mid-ight in an emergency situation such
as if there is a collision, a motor has stalled, the aircraft is rolling in the air, or the aircraft is out of control
and is ascending or descending very quickly. “Anytime” indicates that the motors can be stopped mid-ight
anytime once user performs a combination stick command (CSC). Stopping the motors in mid-ight will
cause the aircraft to crash.
An alert will appear in DJI Fly when a manned aircraft is detected if AirSense is enabled. Read the disclaimer
in the DJI Fly prompt before using AirSense.
Control
Aircraft Settings
Unit Can be set to metric or imperial.
Subject Scanning When enabled, aircraft automatically scans and displays subjects in the
Camera View (only available for single-shot photos and normal video
recording).
Gain and Expo Tuning Supports the gain and expo settings to be ne-tuned on the aircraft and
the gimbal in dierent ight modes, including the max horizontal speed,
max ascent speed, max descent speed, max angular velocity, yaw
smoothness, brake sensitivity, and expo and the gimbal max tilt control
speed and tilt smoothness.
When releasing the control sticks, an increased brake sensitivity reduces the braking distance of
the aircraft, while a decreased brake sensitivity increases the braking distance. Fly with caution.
Gimbal Settings: Tap to set the gimbal mode, advanced settings, gimbal angle, and perform gimbal
calibration.
Remote Controller Settings: Tap to set the function of the customizable button, to calibrate the remote
controller, and to switch stick modes. Make sure to understand the operations of a stick mode before
changing stick mode.
Beginner Flight Tutorial: View the ight tutorial.
Connect to Aircraft: Tap to start linking when the aircraft is not linked to the remote controller.
Camera
Camera Parameter Settings: Displays dierent settings according to the shooting mode.
General Settings: Tap to view and set histogram, overexposure warning, gridlines, peaking level, white
balance, auto sync HD photos, and cache when recording.
Storage Location: Footage can be stored in the aircraft or on a microSD card. Internal storage and microSD cards
can be formatted. The max video cache capacity settings and camera reset settings can also be adjusted.
USB Mode: Mavic 3 Cine supports USB mode, enabling users to copy footage when the battery level of
the aircraft is low. Enable USB mode, power on the aircraft, and connect to a computer to use USB mode.
During this time, the internal storage of the aircraft can be accessed but the SD card cannot.