User manual

Table Of Contents

DJI Mavic 3 User Manual

Using the Battery

Checking Battery Level

Press the power button once to check the battery level.

LED1

LED2

LED3

LED4

Power Button

Battery Level LEDs

: LED is on

: LED is ashing : LED is o

LED1 LED2 LED3 LED4

Battery Level

Battery Level ≥ 88%

75% ≤ Battery Level < 88%

63% ≤ Battery Level < 75%

50% ≤ Battery Level < 63%

38% ≤ Battery Level < 50%

25% ≤ Battery Level < 38%

13% ≤ Battery Level < 25%

0% ≤ Battery Level < 13%

Powering On/O

Press the power button once, then press again, and hold for two seconds to power the battery on or

o. The battery level LEDs display the battery level when the aircraft is powered on.

Low Temperature Notice

1. Battery capacity is signicantly reduced when ying in low-temperature environments of -10° to 5° C

(14° to 41° F). It is recommended to hover the aircraft in place for a while to heat the battery. Make

sure to fully charge the battery before takeo.

2. Batteries cannot be used in extremely low-temperature environments of lower than -10° C (14° F).

3. When in low-temperature environments, end the ight as soon as DJI Fly displays the low battery

level warning.

4. To ensure the optimal performance of the battery, keep the battery temperature above 20° C (68° F).

5. The reduced battery capacity in low-temperature environments reduces the wind speed resistance

performance of the aircraft. Fly with caution.

6. Fly with extra caution at high sea levels.