User manual

Table Of Contents

DJI Mavic 3 User Manual

All the settings except camera action can be applied to all waypoints after selecting Apply to All. Tap

the delete icon to delete a waypoint.

3. POI Settings

Tap POI on the operation panel to switch to POI settings. Use the same method to pin a POI as

used with a waypoint.

Tap the number of the POI to set the altitude of the POI. The POI can be linked to a waypoint.

Multiple waypoints can be linked to the same POI, the camera will point toward the POI during the

Waypoint Flight.

4. Plan a Waypoint Flight

Tap

to plan a Waypoint Flight. Tap Next to adjust the Global Speed, the behavior of End of Flight,

On Signal Lost, and Start Point. The settings apply to all waypoints.

5. Perform a Waypoint Flight

Check the Obstacle Avoidance settings in the Safety section of DJI Fly before performing the

Waypoint Flight. When set to Bypass or Brake, the aircraft will brake and hover in place if an

obstacle is detected during the Waypoint Flight. The aircraft cannot avoid obstacles if Obstacle

Avoidance is disabled. Fly with caution.

Observe the environment and ensure there are no obstacles on the route before performing

Waypoint Flight.

Make sure to maintain visual line of sight (VLOS) with the aircraft. Press the ight pause button in

an emergency situation.

• Tap GO to upload the waypoint ight task. Tap the

button to cancel the uploading process

and return to the waypoint ight edit status.

• The waypoint ight task will be performed after uploading, the ight duration, waypoints, and

distance and will be displayed on the camera view. The control stick input will change the ight

speed during a Waypoint Flight.

• Tap

to pause the Waypoint Flight after the task begins. Tap to stop Waypoint Flight and

return to the waypoint ight edit status. Tap to continue the Waypoint Flight.

When the signal is lost during ight, the aircraft will perform the action set in On Signal Lost.

When the Waypoint Flight is nished, the aircraft will perform the action set in End of Flight.

6. Library

When planning a Waypoint Flight, the task will be generated automatically and saved every minute.

Tap the list icon on the left to enter Library and save the task manually.