User manual

DJI Mavic 3 User Manual
26
©
2022 DJI All Rights Reserved.
4. Tap to access the video.
Exiting MasterShots
Press the Flight Pause button once or tap in DJI Fly to exit MasterShots. The aircraft will hover in place.
Use MasterShots at locations that are clear of buildings and other obstacles. Make sure that there
are no humans, animals, or other obstacles on the ight path. When the lighting is sucient and
the environment is suitable for vision systems, the aircraft will brake and hover in place if there is an
obstacle detected.
Pay attention to objects around the aircraft and use the remote controller to avoid collisions with the
aircraft.
DO NOT use MasterShots in any of the following situations:
a. When the subject is blocked for an extended period or outside the line of sight.
b. When the subject is similar in color or pattern with the surroundings.
c. When the subject is in the air.
d. When the subject moves fast.
e. The lighting is extremely low (<300 lux) or high (>10,000 lux).
DO NOT use MasterShots in places that are close to buildings or where the GNSS signal is weak.
Otherwise, the ight path will be unstable.
Make sure to follow local privacy laws and regulations when using MasterShots.
Hyperlapse
Hyperlapse shooting modes include Free, Circle, Course Lock, and Waypoint.
1:30:301:30:30
StorageStorage
+0.7+0.7
EVEV
5.1K 505.1K 50
RES&FPSRES&FPS
80
24
17
24
17
20
20
80 m
4.6m/s4.6m/s
DD
150
3m/s3m/s
HH
1x
AF
12400:10:20
AE
+1.0+1.0
EVEV
1014.4m
1.6m/s1.6m/s
DD
126m126m
7.9m/s7.9m/s
HH
Mode N
In-Flight
Video
Photo
Super Shot
Timelapes
Free
Circle
Course
Free
The aircraft automatically takes photos and generates a timelapse video. Free mode can be used while
the aircraft is on the ground. After takeo, control the movement and gimbal angle of the aircraft using
the remote controller. Follow the steps below to use Free:
1. Set the interval time, video duration, and max speed. The screen displays the number of photos that
will be taken and how long the shooting time will be.
2. Tap the shutter/record button to begin.
Cruise Control: Set the function of the Customizable button (C1 or C2 button for DJI RC Pro and Fn
button for DJI RC-N1 remote controller) to Cruise Control and press the Customizable button and
control stick at the same time to enter Cruise Control. The aircraft will continue to y at the same speed.