User Manual v2.0 2022.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section. Printing this Document This document supports high resolution printing. Revision Log 2 Version Date Revisions v1.2 2021.12 Added Intelligent Flight Mode section.
Using this Manual Legend Important Hints and Tips Reference Read Before the First Flight Read the following documents before using the DJITM MAVICTM 3: 1. Safety Guidelines 2. Quick Start Guide 3. User Manual It is recommended to watch all tutorial videos on the official DJI website and read safety guidelines before using for the first time. Prepare for your first flight by reviewing the quick start guide and refer to this user manual for more information.
Contents Using this Manual Legend 2 Read Before the First Flight 2 Video Tutorials 2 Download the DJI Fly App 2 Download DJI Assistant 2 (Consumer Drones Series) 2 Product Profile 6 Introduction 6 Using for the First Time 7 Diagram 9 Aircraft 14 Flight Modes 14 Aircraft Status Indicators 15 Return to Home 16 Vision Systems and Infrared Sensing System 21 Intelligent Flight Mode 23 Advanced Pilot Assistance Systems (APAS 5.
Flight Flight Environment Requirements 66 Operating the Aircraft Responsibly 66 Flight Limits and GEO Zones 67 Pre-Flight Checklist 68 Auto Takeoff/Landing 69 Starting/Stopping the Motors 69 Flight Test 70 Appendix 4 66 72 Specifications 72 Firmware Update 77 Troubleshooting Procedures 78 Risk and Warnings 78 Disposal 79 C1 Certification 79 FAR Remote ID Compliance Information 83 After-Sales Information 83 © 2022 DJI All Rights Reserved.
Product Profile This section introduces DJI Mavic 3 and lists the components of the aircraft and remote controller. 5 © 2022 DJI All Rights Reserved.
Product Profile Introduction DJI Mavic 3 features both an Infrared Sensing System and Forward, Backward, Upward, Lateral, and Downward Vision Systems, allowing for hovering and flying indoors as well as outdoors and for automatic Return to Home while avoiding obstacles in all directions. The aircraft has a maximum flight speed of 47 mph (75.6 kph) and a maximum flight time of 46 minutes. The DJI RC Pro remote controller has a built-in 5.
DJI Mavic 3 User Manual Using for the First Time DJI Mavic 3 is folded before being packaged. Follow the steps below to unfold the aircraft and remote controller. Preparing the Aircraft 1. Remove the storage cover. 1 2 2. All Intelligent Flight Batteries are in hibernation mode before delivery to ensure safety. Use the provided charger to charge and activate the Intelligent Flight Batteries for the first time. It takes approximately 1 hour and 36 minutes to fully charge an Intelligent Flight Battery.
DJI Mavic 3 User Manual Preparing the Remote Controller Follow the steps below to prepare to use the DJI RC Pro remote controller. 1. Use the provided charger to charge the remote controller via the USB-C port to active the battery. 2. Remove the control sticks from the storage slots on the remote controller and screw them into place. 3. Unfold the antennas. 4. The remote controller needs to be activated before using for the first time and an internet connection is required for activation.
DJI Mavic 3 User Manual Activating DJI Mavic 3 Aircraft DJI Mavic 3 requires activation before using for the first time. After powering on the aircraft and remote controller, follow the on-screen prompts to activate DJI Mavic 3 using DJI Fly. An internet connection is required for activation. Binding the Aircraft and Remote Controller It is recommended to bind the aircraft and remote controller to help ensure the best possible after-sales service.
DJI Mavic 3 User Manual DJI RC Pro 1 2 3 4 5 8 6 9 7 14 19 15 18 16 17 10 11 12 13 1. Antennas Relay aircraft control and video wireless signals. 9. Confirm Button Press once to confirm a selection. The button does not have a function when using DJI Fly. 2. Back Button Press once to return to the previous screen. Press twice to return to the home screen. 10. Touchscreen Touch the screen to operate the remote controller. Note that the touchscreen is not waterproof. Operate with caution. 3.
DJI Mavic 3 User Manual 21. Control Sticks Storage Slot For storing the control sticks. 20 22. Customizable C1 Button Switch between recentering the gimbal and pointing the gimbal downward. The function can be set in DJI Fly. 21 24 23 22 23. Speaker Outputs sound. 25 24. Customizable C2 Button Press once to turn the Auxiliary Bottom Light on or off. The function can be set in DJI Fly. 20. Air Vent Used for heat dissipation. Do not block the air vent during usage. 25.
DJI Mavic 3 User Manual 7. Photo/Video Toggle Press once to switch between photo and video mode. 8. Remote Controller Cable Connect to a mobile device for video linking via the remote controller cable. Select the cable according to the mobile device. 9. Mobile Device Holder Used to securely mount the mobile device to the remote controller. 10. Antennas Relay aircraft control and video wireless signals. 11. USB-C Port For charging and connecting the remote controller to the computer.
Aircraft DJI Mavic 3 contains a flight controller, video downlink system, vision systems, infrared sensing system, propulsion system, and an Intelligent Flight Battery. 13 © 2022 DJI All Rights Reserved.
Aircraft DJI Mavic 3 contains a flight controller, video downlink system, vision systems, infrared sensing system, propulsion system, and an Intelligent Flight Battery. Flight Modes DJI Mavic 3 has three flight modes, plus a fourth flight mode that the aircraft switches to in certain scenarios. Flight modes can be switched via the Flight Mode switch on the remote controller.
DJI Mavic 3 User Manual Aircraft Status Indicators DJI Mavic 3 has front LEDs and aircraft status indicators. Front LED Front LED Aircraft Status Indicator Aircraft Status Indicator When the aircraft is powered on but the motors are not running, the front LEDs glow solid red to display the orientation of the aircraft. When the aircraft is powered on but the motors are not running, the aircraft status indicators display the status of the flight control system.
DJI Mavic 3 User Manual Return to Home Return to Home (RTH) returns the aircraft to the last recorded Home Point when the positioning system is functioning normally. There are three types of RTH: Smart RTH, Low Battery RTH, and Failsafe RTH. The aircraft automatically flies back to the Home Point and lands when Smart RTH is initiated, the aircraft enters Low Battery RTH, or the video link signal is lost during flight.
DJI Mavic 3 User Manual 4. The aircraft will fly automatically according to the RTH settings, environment, and the transmission signal during RTH. 5. The aircraft lands and the motors stop after reaching the Home Point. Straight Line RTH The aircraft will enter Straight Line RTH when the lighting is not sufficient and the environment is not suitable for the Advanced RTH. Straight Line RTH Procedure: 1. The Home Point is recorded. 2. Straight Line RTH is triggered. 3. The aircraft brakes and hover in place.
DJI Mavic 3 User Manual During Advanced RTH, the aircraft will enter Straight Line RTH if the lighting condition and environment was not suitable for vision systems and the aircraft cannot avoid obstacles. An appropriate RTH altitude must be set before entering RTH. When the remote controller signal is normal during Advanced RTH, the pitch stick can be used to control the flight speed but the orientation and altitude cannot be controlled and the aircraft cannot be flown left or right.
DJI Mavic 3 User Manual controller signal is restored. When the lighting is not sufficient and the vision systems are not available, the aircraft will enter Original Route RTH. Original Route RTH Procedure: 1. The aircraft brakes and hover in place. 2. a. If the aircraft is farther than 50 m from the Home Point, the aircraft adjust its orientation and flies backwards for 50 m on its original flight route before entering Straight Line RTH. b.
DJI Mavic 3 User Manual Landing Protection is activated during Precision Landing. The Precision Landing performance is subject to the following conditions: a. The Home Point must be recorded upon takeoff and must not be changed during flight. Otherwise, the aircraft will have no record of the Home Point terrain features. b. During takeoff, the aircraft must ascend at least 7 m before flying horizontally. c. The Home Point terrain features must remain largely unchanged. d.
DJI Mavic 3 User Manual Vision Systems and Infrared Sensing System DJI Mavic 3 is equipped with both an Infrared Sensing System and Forward, Backward, Lateral, Upward, and Downward Vision Systems. The Upward and Downward Vision Systems consist of two cameras each, and the Forward, Backward, and Lateral Vision Systems consist of four cameras in total. The Infrared Sensing System consists of two 3D infrared modules.
DJI Mavic 3 User Manual Using the Vision Systems When GNSS is unavailable, the Downward Vision System is enabled if the surface has a clear texture and sufficient light. The Forward, Backward, Lateral, and Upward Vision Systems will activate automatically when the aircraft is powered on if the aircraft is in Normal or Cine mode and Obstacle Avoidance is set to Bypass or Brake in DJI Fly.
DJI Mavic 3 User Manual Intelligent Flight Mode FocusTrack FocusTrack includes Spotlight 2.0, Point of Interest 3.0, and ActiveTrack 5.0. Spotlight 2.0 Control the aircraft manually while the camera remains locked on the subject. The mode supports both stationary and moving subjects such as vehicles, boats, and people.
DJI Mavic 3 User Manual 2. Drag a box around the subject in the camera view or enable Subject Scanning under Control settings in DJI Fly Control and tap the recognized subject to enable FocusTrack. The default mode is Spotlight. Tap the icon to switch between Spotlight, ActiveTrack, and POI. FocusTrack supports 2x zoom. The zoom ratio will be limited if it is too large to recognize a subject. Tap GO to start FocusTrack. Mode N 80 In Flight 12 26 20 只能放置在控件右侧。在控件末尾或选中时消失。 7.9m/s 1.
DJI Mavic 3 User Manual Be extra vigilant when using FocusTrack in any of the following situations: a. The tracked subject is not moving on a level plane. b. The tracked subject changes shape drastically while moving. c. The tracked subject is out of sight for an extended period. d. The tracked subject is moving on a snowy surface. e. The tracked subject has a similar color or pattern to its surrounding environment. f. The lighting is extremely low (<300 lux) or high (>10,000 lux).
DJI Mavic 3 User Manual 4. Tap to access the video. Exiting MasterShots Press the Flight Pause button once or tap in DJI Fly to exit MasterShots. The aircraft will hover in place. Use MasterShots at locations that are clear of buildings and other obstacles. Make sure that there are no humans, animals, or other obstacles on the flight path. When the lighting is sufficient and the environment is suitable for vision systems, the aircraft will brake and hover in place if there is an obstacle detected.
DJI Mavic 3 User Manual Circle The aircraft automatically takes photos while flying around the selected subject to generate a timelapse video. Follow the steps below to use Circle: 1. Set the interval time, video duration, and max speed. Circle can be selected to travel in either a clockwise or counter-clockwise direction. The screen displays the number of photos that will be taken and how long the shooting time will be. 2. Select a subject on the screen.
DJI Mavic 3 User Manual QuickShots QuickShots shooting modes include Dronie, Rocket, Circle, Helix, Boomerang, and Asteroid. Mavic 3 records according to the selected shooting mode and automatically generates a short video. The video can be viewed, edited, or shared to social media from playback. Dronie: The aircraft flies backward and ascends, with the camera locked on the subject. Rocket: The aircraft ascends with the camera pointing downward. Circle: The aircraft circles around the subject.
DJI Mavic 3 User Manual Mode N In-Flight 80 24 17 20 20 Rocket Photo Video Dronie Start QuickShots Circle Hyperlapse 7.9m/s H 126m 4. Tap 1.6m/s D 1014.4m 4K 30 Storage RES&FPS EV EVEV 06:21 4K 60 +0.7 to access the video. Exiting QuickShots Press the Flight Pause button once or tap place. in DJI Fly to exit QuickShots. The aircraft will hover in Use QuickShots at locations that are clear of buildings and other obstacles.
DJI Mavic 3 User Manual Waypoint Flight Waypoint Flight enables the aircraft to capture images during a flight according to the waypoint flight route generated by the preset waypoints. Points of Interest (POI) can be linked to the waypoints. The heading will point toward the POI during flight. A waypoint flight route can be saved and repeated. Using Waypoint Flight 1. Enable Waypoint Flight Tap the Waypoint Flight icon on the left of the camera view in DJI Fly to enable Waypoint Flight. 2.
DJI Mavic 3 User Manual Settings Tap the waypoint number for settings such as camera action, altitude, speed, heading, gimbal tilt, zoom, and hovering time. Camera Action Choose between Non, Take Photo, Start or Stop Recording. Altitude Set the altitude from the take-off point. Ensure to take off at the same altitude to obtain better performance when a Waypoint Flight is repeated. Speed The flight speed can be set to Global Speed or Custom.
DJI Mavic 3 User Manual All the settings except camera action can be applied to all waypoints after selecting Apply to All. Tap the delete icon to delete a waypoint. 3. POI Settings Tap POI on the operation panel to switch to POI settings. Use the same method to pin a POI as used with a waypoint. Tap the number of the POI to set the altitude of the POI. The POI can be linked to a waypoint. Multiple waypoints can be linked to the same POI, the camera will point toward the POI during the Waypoint Flight. 4.
DJI Mavic 3 User Manual • Tap the list icon to check the saved tasks, and tap to open a task. • Tap the icon to edit the name of the task. • Slide left to delete a task. • Tap the icon on the top right corner to change the order of the tasks. :Tasks will be saved according to the time. :Tasks will be saved according to the distance between the start waypoint and the current position of the aircraft from shortest to farthest. 7. Exit Waypoint Flight Tap the icon to exit Waypoint Flight.
DJI Mavic 3 User Manual Cruise Control The Cruise Control function enables the aircraft to lock the current control stick input of the remote control when conditions permit. Fly at the speed corresponding to the current control stick input without continually using control stick movements, and also supports more camera movements such as spiraling up by increasing the control stick input. Using Cruise Control 1.
DJI Mavic 3 User Manual Advanced Pilot Assistance Systems (APAS 5.0) The Advanced Pilot Assistance Systems 5.0 (APAS 5.0) feature is available in Normal and Cine mode. When APAS is enabled, the aircraft continues to respond to user commands and plans its path according to control stick inputs and the flight environment. APAS makes it easier to avoid obstacles, obtain smoother footage, and gives a better flying experience. Keep moving the control sticks in any directions.
DJI Mavic 3 User Manual QuickTransfer Mavic 3 can connect directly to mobile devices via Wi-Fi, enabling users to download photos and videos from the aircraft to the mobile device through DJI Fly without the need of the RC-N1 remote controller. Users can enjoy faster and more convenient downloads with a transmission rate of up to 80 MB/s. Usage Method 1: mobile device is not connected to the remote controller 1. Power on the aircraft and wait until the self-diagnostic tests of the aircraft are complete.
DJI Mavic 3 User Manual Propellers There are two types of DJI Mavic 3 Low-Noise Quick Release Propellers, which are designed to spin in different directions. Marks are used to indicate which propellers should be attached to which motors. Make sure to match the propeller and motor following the instructions. Attaching the Propellers Attach the propellers with marks to the motors with marks and the unmarked propellers to the motors without marks.
DJI Mavic 3 User Manual Intelligent Flight Battery The DJI Mavic 3 Intelligent Flight Battery is a 15.4 V, 5000 mAh battery with smart charging and discharging functionality. Battery Features 1. Battery Level Display: The LED indicators display the current battery level. 2. Auto-Discharging Function: To prevent swelling, the battery automatically discharges to 96% of the battery level when it is idle for three days, and automatically discharges to 60% of the battery level when it is idle for nine days.
DJI Mavic 3 User Manual Using the Battery Checking Battery Level Press the power button once to check the battery level.
DJI Mavic 3 User Manual Charging the Battery Fully charge the Intelligent Flight Battery before every flight using the provided Mavic 3 Battery Charging Hub and DJI 65W Portable Charger. Using Charging Hub When used with the DJI 65W Portable Charger, the DJI Mavic 3 Battery Charging Hub can charge up to three Intelligent Flight Batteries in sequence from high to low power level. The charging time for one battery is approximately 1 hour and 36 minutes. 1 2 3 1. Status LED Indicator 2. Battery Port 3.
DJI Mavic 3 User Manual Using DJI 65W Portable Charger 1. Connect the DJI 65W Portable Charger to an AC power supply (100-240 V, 50/60 Hz). 2. Attach the aircraft to the charger using the battery charging cable with the battery powered off. 3. The battery level LEDs display the current battery level during charging. 4. The Intelligent Flight Battery is fully charged when all the battery level LEDs are off. Detach the charger when the battery is fully charged.
DJI Mavic 3 User Manual If the battery protection mechanisms activate, in order to resume charging it is necessary to unplug the battery from the charger and plug it in again. If the charging temperature is abnormal, wait for the charging temperature to return to normal, and the battery will automatically resume charging without requiring to unplug and plug in the charger again. Inserting the Intelligent Flight Battery Insert the Intelligent Flight Battery into the battery compartment of the aircraft.
DJI Mavic 3 User Manual Gimbal and Camera Gimbal Profile The 3-axis gimbal of DJI Mavic 3 provides stabilization for the camera, allowing you to capture clear and stable images and video. The control tilt range is -90° to +35°. 35° 0° -90° Use the gimbal dial on the remote controller to control the tilt of the camera. Alternatively, enter the camera view in DJI Fly. Press the screen until an adjustment bar appears and drag up and down to control the tilt of the camera.
DJI Mavic 3 User Manual The gimbal lock function works normally when the operating temperature is -10° to 40° C (14° to 104° F). It may malfunction outside this temperature range and a prompt will appear in DJI Fly if this occurs. If the gimbal lock malfunctions when attempting to unlock the gimbal, users can adjust the gimbal axes manually to unlock the gimbal. It is not recommended to manually adjust the gimbal axes unless necessary.
Remote Controller This section describes the features of the remote controller and includes instructions for controlling the aircraft and the camera. 45 © 2022 DJI All Rights Reserved.
Remote Controller DJI RC Pro The DJI RC Pro remote controller features O3+, the latest version of DJI’s signature OcuSync image transmission technology, works at both 2.4 and 5.8 GHz, is capable of selecting the best transmission channel automatically, and can transmit a live HD view from the camera of the aircraft at a distance of up to 15 km. The built-in 5.
DJI Mavic 3 User Manual Controlling the Aircraft Three preprogrammed modes (Mode 1, Mode 2, and Mode 3) are available and custom modes can be configured in DJI Fly. The default mode is Mode 2. Mode 1 Left Stick Right Stick Forward Up Down Backward Left Turn Left Mode 2 Right Turn Right Left Stick Right Stick Forward Up Down Backward Turn Left Mode 3 Left Stick Left Turn Right Right Right Stick Forward Up Down Backward Left 47 © 2022 DJI All Rights Reserved.
DJI Mavic 3 User Manual Remote Controller (Mode 2) ( Aircraft Remarks Indicates Nose Direction) Moving the left stick up or down changes the aircraft’s altitude. Push the stick up to ascend and down to descend. The more the stick is pushed away from the center position, the faster the aircraft will change altitude. Push the stick gently to prevent sudden and unexpected changes in altitude. Moving the left stick to the left or right controls the orientation of the aircraft.
DJI Mavic 3 User Manual RTH Button Press and hold the RTH button until the remote controller beeps to start RTH. Press this button again to cancel RTH and regain control of the aircraft. Refer to the Return to Home section for more information about RTH. Customizable Buttons Including C1, C2, and the 5D button. Go to System Settings in DJI Fly and select Control to customize the function of the button.
DJI Mavic 3 User Manual Remote Controller Alert The remote controller vibrates or beeps when there is an error or warning. Pay attention when prompts appear on the touchscreen or in DJI Fly. Slide down from the top to select Do Not Disturb or Mute to disable some alerts. Optimal Transmission Zone The signal between the aircraft and the remote controller is most reliable when the antennas are positioned in relation to the aircraft as illustrated below.
DJI Mavic 3 User Manual Touchscreen Operations Home 4:53 DJI Fly Gallery Files Firefox Setting Guide The top of the touchscreen displays the time, Wi-Fi signal, and battery level of the remote controller. Some apps are already installed by default such as DJI Fly, Gallery, Files, Firefox, Settings, and Guide. Settings includes network, display, voice, and Bluetooth configurations. Users can quickly learn about the features under Guide.
DJI Mavic 3 User Manual Quick Settings 2 1 10:12 Notifications DJI Fly 3 4 Sat, Mar 30 11m ago Expore skypixel.com One billion colors captured by the 10-bit DlogM color profile. Wi-Fi Bluetooth Do not distube Record Screen 5 Screenshot Mobile Airplane 6 7 1. Notifications Tap to check system notifications. 2. Recent Tap to check recently opened apps. 3. Home Tap to return to the home screen. 4. System Settings Tap to access system settings. 5. Shortcuts : Tap to enable or disable Wi-Fi.
DJI Mavic 3 User Manual Advanced Feature Calibrating the Compass The compass may need to be calibrated after the remote controller is used in areas with electromagnetic interference. A warning prompt will appear if the compass of the remote controller requires calibration. Tap the warning prompt to start calibrating. In other cases, follow the steps below to calibrate your remote controller. 1. Enter the home screen. 2. Select Settings, scroll down, and tap Compass. 3.
DJI Mavic 3 User Manual RC-N1 Built into the remote controller is DJI'S long-range tranmission technology, offering a maximum transmission range of 15 km and displaying video from the aircraft to DJI Fly on a mobile device at up to 1080p 60fps (depending on phone type). The aircraft and camera are easy to control using the onboard buttons and the detachable control sticks make the remote controller easier to store.
DJI Mavic 3 User Manual Controlling the Aircraft The control sticks control the aircraft’s orientation (pan), forward/backward movement (pitch), altitude (throttle), and left/right movement (roll). The control stick mode determines the function of each control stick movement. Three preprogrammed modes (Mode 1, Mode 2, and Mode 3) are available and custom modes can be configured in DJI Fly. The default mode is Mode 2.
DJI Mavic 3 User Manual Remote Controller (Mode 2) ( Aircraft Remarks Indicates Nose Direction) Moving the left stick up or down changes the aircraft’s altitude. Push the stick up to ascend and down to descend. The more the stick is pushed away from the center position, the faster the aircraft will change altitude. Push the stick gently to prevent sudden and unexpected changes in altitude. Moving the left stick to the left or right controls the orientation of the aircraft.
DJI Mavic 3 User Manual Flight Pause/RTH Button Press once to make the aircraft brake and hover in place. If the aircraft is performing Smart RTH or auto landing, press once to exit the procedure and then brake. Press and hold the RTH button until the remote controller beeps to start RTH. Press this button again to cancel RTH and regain control of the aircraft. Refer to the Return to Home section for more information about RTH.
DJI Mavic 3 User Manual Linking the Remote Controller The aircraft and remote controller must be linked before using. Follow these steps to link a new remote controller: 1. Power on the remote controller and the aircraft. 2. Launch DJI Fly. 3. In camera view, tap and select Control and Pair to Aircraft (Link). 4. Press and hold the power button of the aircraft for more than four seconds. The aircraft beeps once indicating it is ready to link. The aircraft beeps twice indicating linking is successful.
DJI Fly App This section introduces the main functions of the DJI Fly app. 59 © 2022 DJI All Rights Reserved.
DJI Fly App Home Launch DJI Fly and enter the home screen. Altitude Zone (120m) Album Fly Spots Skypixel Academy Profile GO FLY Fly Spots View or share nearby suitable flight and shooting locations, learn more about GEO zones, and preview aerial photos of different locations taken by other users. Academy Tap the icon in the top right corner to enter Academy. Product tutorials, flight tips, flight safety, and manual documents can be viewed here.
DJI Mavic 3 User Manual Camera View 1 2 N Mode 19 In-Flight 3 80 4 5 6 24 17 7 20 20 8 9 7x 18 10 1.0x 17 AF 11 3m/s 4.6m/s H 150 m D 80 m 16 15 Storage RES&FPS EV 06:21 4K 60 14 +0.7 13 12 1. Flight Mode N : Displays the current flight mode. 2. System Status Bar In-Flight : Indicates aircraft flight status and displays various warning messages. 3. Battery Information 80 24'17" : Displays the current battery level and remaining flight time.
DJI Mavic 3 User Manual Battery: Tap to view the battery information such as battery cell status, serial number and times charged. Auxiliary LED: Tap to set the auxiliary LED to auto, on, or off. Do not turn on the Auxiliary LED before takeoff. Aircraft Front Arm LEDs: In auto mode, the aircraft front LEDs will be disabled during recording to ensure the quality is not affected. Unlock GEO Zone: Tap to view the information about unlocking GEO zones.
DJI Mavic 3 User Manual Restart the aircraft and disable USB mode in DJI Fly to exit USB mode. USB mode will be enabled once again when the aircraft is restarted if it was disabled via DJI Assistant 2. In USB mode, the aircraft will disconnect from the remote controller, the frame arm light will turn off, and the fan inside the aircraft will stop. Transmission Live Stream Platform, HDMI Output, Frequency, and Channel Mode settings.
DJI Mavic 3 User Manual 15. Flight Telemetry D 80m H 150m 4.6m/s 3m/s : Displays the distance between the aircraft and the Home Point, height from the Home Point, aircraft horizontal speed, and aircraft vertical speed. 16. Map : Tap to switch to the Attitude Indicator, which displays information such as the orientation and tilt angle of the aircraft, position of the remote controller, and position of the Home Point.
Flight This section describes safe flight practices and flight restrictions. 65 © 2022 DJI All Rights Reserved.
Flight Once pre-flight preparation is complete, it is recommended to hone your flight skills and practice flying safely. Make sure that all flights are carried out in an open area. Refer to the Remote Controller and DJI Fly sections for information about using the remote controller and the app to control the aircraft. Flight Environment Requirements 1. Do not use the aircraft in severe weather conditions including wind speeds exceeding 12 m/s, snow, rain, and fog. 2. Only fly in open areas.
DJI Mavic 3 User Manual Flight Limits and GEO Zones Unmanned aerial vehicle (UAV) operators should abide by the regulations from self-regulatory organizations such as the International Civil Aviation Organization, the Federal Aviation Administration, and local aviation authorities. For safety reasons, flight limits are enabled by default to help users operate this aircraft safely and legally. Users can set flight limits on height and distance.
DJI Mavic 3 User Manual When GNSS is available Flight Limits DJI Fly App Max Altitude Aircraft's altitude cannot exceed the specified value Warning: Height limit reached Max Radius Flight distance must be within the max radius Warning: Distance limit reached Only Downward Vision System is available Flight Limits DJI Fly App Max Altitude Height is restricted to 30 m when the GNSS signal is weak. Warning: Height limit Height is restricted to 3 m when the GNSS signal is weak reached.
DJI Mavic 3 User Manual Auto Takeoff/Landing Auto Takeoff Use auto takeoff: 1. Launch DJI Fly and enter the camera view. 2. Complete all steps in the pre-flight checklist. 3. Tap . If conditions are safe for takeoff, press and hold the button to confirm. 4. The aircraft will take off and hover 1.2 m above the ground. Auto Landing Use auto landing: 1. Tap . If conditions are safe to land, press and hold the button to confirm. 2. Auto landing can be cancelled by tapping . 3.
DJI Mavic 3 User Manual Stopping the Motors Mid-Flight Stopping motors mid-flight will cause the aircraft to crash. The motors should only be stopped midflight in an emergency situation such as if a collision has occurred or if the aircraft is out of control and is ascending or descending very quickly, rolling in the air, or if a motor has stalled. To stop the motors mid-flight use the same CSC that was used to start the motors. The default setting can be changed in DJI Fly.
Appendix 71 © 2022 DJI All Rights Reserved.
Appendix Specifications Aircraft Takeoff Weight 895 g (Mavic 3) 899 g (Mavic 3 Cine) Dimensions (L×W×H) Folded: 221×96.3×90.3 mm Unfolded: 347.5×283×107.7 mm Diagonal Distance 380.
DJI Mavic 3 User Manual Electronic Shutter Speed 1/8000-8 s Max Image Size 5280 × 3956 Still Photography Modes Single: 20 MP Automatic Exposure Bracketing (AEB): 20 MP, 3/5 Frames at 0.7EV Step Timed: 20 MP 2/3/5/7/10/15/20/30/60 seconds Video Resolution Apple ProRes 422 HQ /422/422LT 5.1K: 5120 × 2700@24/25/30/48/50fps DCI 4K: 4096 × 2160@24/25/30/48/50/60/120*fps 4K: 3840 × 2160@24/25/30/48/50/60/120*fps H.264/H.265 5.
DJI Mavic 3 User Manual Max Control Speed (tilt) 100°/s Angular Vibration Range ±0.007° Sensing System Type Omnidirectional Vision Systems and Infrared Sensing System Forward Vision System Precision Measurement Range: 0.5-20 m Detection Range: 0.5-200 m Effective Sensing Speed: ≤15 m/s FOV: 90° (horizontal), 103° (vertical) Backward Vision System Precision Measurement Range: 0.
DJI Mavic 3 User Manual Battery Charger Input 100-240 V AC (47-63 Hz) 2.0 A Output USB-C: 5.0 V 5.0 A/9.0 V 5.0 A/12.0 V 5.0 A/15.0 V 20.0 V 3.25 A/5.0 V~20.0 V 3.25 A USB-A: 5 V 2 A Rated Power 65 W 4.3 A/ Charging Hub Input USB-C: 5 V-20 V Output Battery Port: 12 V - 17.6 V Rated Power 65 W Charging Type Charge three Intelligent Flight Batteries in sequence Charging Temperature 5° to 40° C (41° to 104° F) 5.0 A max 5.0 A max Car Charger Input Car Power Port: 12.
DJI Mavic 3 User Manual DJI RC-N1 Remote Controller Transmission System When used with different aircraft hardware configurations, DJI RCN1 Remote Controllers will automatically select the corresponding firmware version for updating and support the following transmission technologies enabled by the hardware performance of the linked aircraft models: a. DJI Mini 2/ DJI Mavic Air 2: O2 b. DJI Air 2S: O3 c.
DJI Mavic 3 User Manual Firmware Update Use DJI Fly or DJI Assistant 2 (Consumer Drones Series) to update the aircraft firmware. Using DJI Fly When you connect the aircraft or remote controller to DJI Fly, you will be notified if a new firmware update is available. To start updating, connect your remote controller or mobile device to the internet and follow the onscreen instructions. Note that you cannot update the firmware if the remote controller is not linked to the aircraft. Internet is required.
DJI Mavic 3 User Manual Troubleshooting Procedures 1. Why can the battery not be used before the first flight? The battery must be activated by charging before using it for the first time. 2. How to solve the gimbal drift issue during flight? Calibrate IMU and compass in DJI Fly. If the problem persists, contact DJI Support. 3. No function Check if the Intelligent Flight battery and the remote controller are activated by charging. If the problems persist, contact DJI support. 4.
DJI Mavic 3 User Manual Disposal Observe the local regulations related to electronic devices when disposing of the aircraft and remote controller. Battery Disposal Dispose of the batteries in specific recycling containers only after a complete discharge. DO NOT dispose of the batteries in regular trash containers. Strictly follow the local regulations regarding the disposal and recycling of batteries. Dispose of a battery immediately if it cannot be powered on after over-discharging.
DJI Mavic 3 User Manual Direct Remote ID 1. Transport Method: Wi-Fi Beacon 2. Method of uploading the UAS Operator Registration Number to the aircraft: Enter DJI Fly > Safety > UAS Remote Identification, and then upload UAS Operator Registration Number. List of Items, including qualified accessories 1. DJI Mavic 3 V2.0 Low-Noise Propellers (Model: 9453F, 8.5g) 2. DJI Mavic 3 V2.0 ND Filters Set (ND 4/8/16/32/64/128/256/512) (2.3 g) 3. DJI Mavic 3 V2.0 Intelligent Flight Battery (Model: BWX260-5000-15.
DJI Mavic 3 User Manual H AGL (not supported) Takeoff Height error Restricted Zones Appear red in the DJI app. Users will be prompted with a warning, and flight is prevented. UA cannot fly or takeoff in these zones. Restricted Zones may be unlocked, to unlock contact flysafe@dji.com or go to Unlock A Zone at dji.com/flysafe. Authorization Zones Appear blue in the DJI app. Users will be prompted with a warning, and flight is limited by default. UA cannot fly or takeoff in these zones unless authorized.
DJI Mavic 3 User Manual Altitude Zones Altitude zones are zones with a limited altitude and appear in gray on the map. When approaching, users receive warnings in the DJI app. Enhanced Warning Zones A warning message will prompt users when the drone reaches the edge of the zone. Warning Zones A warning message will prompt users when the drone reaches the edge of the zone. When the aircraft and DJI Fly app cannot obtain a GPS signal, the GEO awareness function will be inoperative.
DJI Mavic 3 User Manual Original Instructions This manual is provided by SZ DJI Technology, Inc., and the content is subject to change. Address: 14th Floor, West Wing, Skyworth Semiconductor Design Building, No 18 Gaoxin South 4th Ave, Nanshan District, Shenzhen, China, 518057. FAR Remote ID Compliance Information The aircraft complies with the requirements of 14 CFR Part 89: • The aircraft automatically broadcasts Remote ID messages from takeoff to shut down.
DJI Support http://www.dji.com/support This content is subject to change. Download the latest version from http://www.dji.com/mavic-3 If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. DJI is a trademark of DJI. Copyright © 2022 DJI All Rights Reserved.
