MAVIC 2 PRO Quick Start Guide v1.
Aircraft The DJITM MAVICTM 2 Pro features omnidirectional Vision Systems and Infrared Sensing Systems*, and a fully stabilized 3-axis gimbal with a 1" CMOS sensor camera (jointly developed by DJI and Hasselblad) that shoots 4K video and 20-megapixel photos. DJI signature technologies such as Obstacle Sensing and Intelligent Flight Modes like HyperLapse, ActiveTrackTM 2.0, QuickShot, Panorama, and Advanced Pilot Assistance Systems, help you capture complex shots effortlessly.
Remote Controller Built into the remote controller is the DJI’s long-range transmission technology OCUSYNCTM 2.0, offering a maximum transmission range of 6.2 mi (10 km) and displaying video from the aircraft to the DJI GO 4 app on your mobile device at up to 1080p. An on-board LCD screen gives real-time aircraft data information and the detachable control sticks make the remote controller easier to store. Maximum run time: 2 hours and 15 minutes* 1. LCD Screen 2. Flight Pause Button 3. 5D Button 4.
1. Download the DJI GO 4 App and Watching Tutorial Videos Search “DJI GO 4” in the App Store or Google Play or scan the QR code below to download the app on your mobile device. DJI GO 4 Watch the tutorial videos at www.dji.com/mavic-2/info#video or in DJI GO 4 by tapping the icon in the top right corner of your screen. Tutorial videos DJI GO 4 is compatible with iOS 10.0.2 (or later) or Android 5.0 (or later). 2. Preparing the Aircraft 2 2 1 1 3 3 Remove the gimbal cover from the camera.
3. Charging the Batteries Use the provided charger to fully charge the Intelligent Flight Battery before first use. Remove the Intelligent Flight Battery Power Outlet 100 - 240V B B A A Charging Time: Charging Time: ~1 hour 30 minutes ~2 hour 15 minutes Remove the remote controller cable before charging. Checking the Battery Levels and Powering On/Off Low High Press once to check the battery level. Press, then press and hold to turn on/off.
4. Preparing the Remote Controller Unfold the antennas and mobile device clamps, then attach the control sticks. Strong Weak Set the antennas parallel to each other 1 Place one end of the RC cable to the end of the slot. 2 3 Optimal Transmission Range Attach your mobile device within the clamps. Ensure the control sticks are firmly mounted. The remote controller cable with the Lightning connector is mounted by default.
5. Preparing for Takeoff DJI GO 4 App Power on the remote controller Power on the aircraft Launch DJI GO 4 Use your DJI account to activate the aircraft. Activation requires an internet connection. Internet 6. Flight Before taking off, make sure the Aircraft Status Bar in DJI GO 4 displays “Ready to Go”.
Remote Controller Operation The default flight control is known as Mode 2. The left stick controls the aircraft's altitude and heading, while the right stick controls its forward, backward, left and right movements. The gimbal dial controls the camera's tilt. Left Stick Right Stick Up Forward Down Turn Left Backward Left Turn Right Right Press the Flight Pause button for emergency braking during flight.
7. Fly Safe 120m Fly in Open Areas Strong GPS Signal Maintain Line of Sight Fly Below 400 Feet (120 m) Avoid flying over or near obstacles, crowds, high voltage power lines, trees or bodies of water. DO NOT fly near strong electromagnetic sources such as power lines and base stations as it may affect the onboard compass. ≥10 m/s DO NOT use the aircraft in adverse weather conditions such as rain, snow, fog and wind speeds exceeding 10 m/s or 22 mph.
Specifications Aircraft Weight Max Speed Max Service Ceiling Above Sea Level Operating Temperature GNSS Operating Frequency Transmitter Power (EIRP) Gimbal Controllable Range Camera Sensor Lens ISO Range Electronic Shutter Speed Max Image Size Still Photography Modes Video Recording Modes Video Storage Bitrate Photo Video Supported SD Cards 907 g 44.7 mph (72 kph) in Sport mode without wind 19685 ft (6000 m) 14° to 104° F (-10° to 40° C) GPS + GLONASS 2.4-2.4835 GHz; 5.725-5.850 GHz 2.
Transmitter Power (EIRP) 2.4 GHz FCC: ≤26 dBm; CE/MIC: ≤20 dBm; SRRC: ≤20 dBm 5.8 GHz FCC: ≤26 dBm; CE: ≤14 dBm; SRRC: ≤26 dBm Operating Voltage Supported Mobile Device Size 1800mA @ 3.83V (when charging the mobile device) Thickness supported: 6.5 - 8.5 mm, Max length: 160 mm Supported USB port types: Lightning, Micro USB (Type-B) USB-C Charger Voltage Rated Power Intelligent Flight Battery Capacity Voltage Battery Type Energy Net Weight Charging Temperature Range Max Charging Power 17.6±0.
MAVIC 2 PRO For online support, please scan this c ode with Facebook Messenger 0M6DPARM05UK
