User manual

MAVIC 2 ENTERPRISE Advanced
User Manual
©
2021 DJI All Rights Reserved.
67
Smart Controller
Method 1: Wireless
Make sure the remote controller is connected to the internet while updating.
1. Power on the remote controller. Tap
and then , and scroll to the bottom of the page and tap
System Update.
2. Tap Check for Updates to check the firmware. A prompt will appear if a firmware update is
available.
3. Follow the prompts to nish the update.
4. The remote controller automatically restarts when the update is complete.
Method 2: DJI Assistant 2 (Enterprise Series)
1. Make sure the remote controller is powered o and connect it to a computer using a USB 3.0
Type-C cable.
2. Power on the remote controller.
3. Launch DJI Assistant 2 and log in using a DJI account.
4. Click the Smart Controller icon and then Firmware Update.
5. Select and conrm the rmware version to update to.
6. DJI Assistant 2 will download and update the rmware automatically.
7. The remote controller will restart when the update is complete.
Make sure the remote controller has a battery level of more than 50% before updating.
DO NOT disconnect the USB-C cable during the update.
Make sure the remote controller or the computer is connected to the internet during the update.
The update takes approximately 15 minutes.
After-Sales Information
Visit https://www.dji.com/support to learn more about after-sales service policies, repair services and
support.
Keep people and animals at a safe distance during any rmware update, system calibration, or
parameter setting procedures.
For safety, always update to the latest rmware version.
If a rmware update is available, users will be prompted to update immediately or within three days.
If the rmware update is ignored, users are required to agree to the disclaimer. The user’s decision
not to update to the latest rmware is recorded to be uploaded and maintained on a DJI designated
server.
The remote controller may unlink from the aircraft after updating firmware. Re-link the remote
controller and aircraft.
Make sure to check all connections and remove the propellers from the motors before updating
rmware.