User manual

MAVIC 2 ENTERPRISE Advanced
User Manual
18
©
2021 DJI All Rights Reserved.
Warning
Scenario
Aircraft Status
Indicator
DJI Pilot App Actions
Low
Battery
Level
Remaining battery level
supports RTH.
Blinks red slowly
Choose RTH or
resume normal
ight.
Select an option. If no
action is taken, the aircraft
will enter RTH.
Remaining battery level
supports Emergency
RTH (when in RTH, with a
normal remote controller
signal, and at an altitude
higher than 50 m).
Choose
Emergency RTH
or resume RTH.
Select an option.
Emergency RTH (aircraft
descends to 50 m and
returns to the Home Point)
or resume RTH (aircraft
ies to Home Point without
descending). If no action is
taken, the aircraft will enter
Emergency RTH.
Remaining battery level
supports Emergency
Landing (when in RTH
with a normal remote
controller signal).
Aircraft lands.
Action cannot be
canceled.
Aircraft lands immediately.
Critically
Low
Battery
Level
Aircraft lands after 10
seconds (when ying
normally with a critical
low battery level).
Blinks red quickly
Aircraft lands
after 10 seconds.
Action cannot be
canceled.
Aircraft lands after 10
seconds.
Aircraft lands
automatically (when
ying normally with an
extremely critical low
battery level).
Aircraft lands
immediately.
Action cannot be
canceled.
Aircraft lands immediately.
Failsafe RTH
The Forward Vision System allows the aircraft to create a real-time map of its ight route as it ies.
If the Home Point was successfully recorded and the compass is functioning normally, Failsafe RTH
automatically activates after the remote controller signal is lost for more than two seconds.
When Failsafe RTH is activated, the aircraft starts to retrace its original ight route home. If the remote
control signal is re-established within 60 seconds of Failsafe RTH being activated, the aircraft hovers at
its present location for 10 seconds and waits for pilot commands. Press the RTH button on the remote
controller to cancel Failsafe RTH and retake control. If no pilot command is given, the aircraft ies to the
Home Point in a straight line. If the remote control signal is still lost 60 seconds after activating Failsafe
RTH, the aircraft stops retracing its original ight route and ies to the Home Point in a straight line.
RTH Procedure
1. The aircraft adjusts its orientation.
2. a. If the aircraft is further than 20 m from the Home Point when RTH begins, it ascends to the
pre-set RTH altitude and flies to the Home Point at a speed of 12 m/s. If the current altitude
is higher than the RTH altitude, the aircraft flies to the Home Point at the current altitude.
Forward and Backward Vision Systems are enabled.