MATRICE 300 RTK Release Notes

M300 RTK Release Notes

http://www.dji.com/matrice-300

• Supports photo download from the camera for OSDK.

• Supports accurate meta-tagging for PSDK payloads.

• Adds support for Three-propeller Emergency Landing if the aircraft loses the capability of one motor

during flight.

• Adds support for GEO Unlocking.

• Optimizes obstacle avoidance logic in the vertical direction of the aircraft.

• Optimizes control precision for AI Spot-check.

• Optimizes battery self-heating and protection strategy and battery balancing function.

• Fixed occasional issue: Breakpoints prevent the aircraft from continued flight in Flight Mission.

Notes

• Make sure that the aircraft, remote controller, battery, D-RTK 2 mobile station (if used), payload (if used)

are updated to the latest firmware version.

• Download the latest firmware from official website to microSD card to update the ZenmuseZ30, XT S,

XT2 or H20 / H20T.

• It is required to use the DJI Pilot app built-in the remote controller, or download the app of V1.8.0R or

later.