MATRICE 300 RTK Release Notes

M300 RTK Release Notes

http://www.dji.com/matrice-300

• Added functionality to support the adaptive bit rate for the Video Transmission System of PSDK camera.

• Adjusted the power map to FCC in Hong Kong, China.

Sensing System

• Adjusted the horizontal obstacle avoidance status to four-way independent display, and supported to use

the infrared sensor for obstacle avoidance once the vision system obstacle avoidance failed.

• Optimized the positioning stability for the vision system.

Remote Controller

• Added functionality to control the camera zoom by rotating the Gimbal Pan Control Dial with holding the

Confirm Button.

• Added the remote controller vibration for reminding when the RTK/GPS/vision signal is lost.

• Added functionality to adapt external mobile devices (recommended devices: Samsung Galaxy Tab S6,

Xiaomi tablet 4, Huawei M3, M5, M6).

Notes

• Make sure that the aircraft, remote controller, battery, D-RTK 2 mobile station (if used), payload (if used)

are updated to the latest firmware version.

• Download the latest firmware from official website to microSD card to update the ZenmuseZ30, XT S,

XT2 or H20 / H20T.

• It is required to use the DJI Pilot app built-in the remote controller, or download the app of V1.9.0R or

later.