MATRICE 300 RTK Release Notes

M300 RTK Release Notes

http://www.dji.com/matrice-300

• Added a consistency firmware update entrance in the Health Management System.

• Optimized the firmware update in app efficiency.

• Adjusted the minimum battery power requirement for firmware update to 25% for the aircraft and

50% for the remote controller.

Flight Controller

• Added RTK single point backup to improve flight reliability in special scenarios.

• Optimized the return home algorithm during low battery mode to improve the safety of long-distance

return home in windy weather.

• Optimized the Three Propeller Emergency Landing feature to improve the controllability during landing.

• The maximum descent speed of P mode is increased from 3 m/s to 4 m/s.

Smart Pin & Track

• Added Look At feature where user can control the gimbal and camera to focus to PIN point using one

click.

• Added support to modify the GPS 3D coordinates of the PIN point on map page.

• Adjusted to display the height of RNG and Smart Track as altitude.

• Optimized the Smart Track algorithm to improve tracking accuracy and stability.

• Optimized the RNG feature to improve the stability of ranging.

DJI Pilot App

• Added the ability to display the GPS coordinates of the aircraft on the map page.

• Added tutorial videos academy.

• Added the function to manually switch to the attitude mode, and the T/P/S mode can be set to A/P/S

mode in the app.

• Added functionality to export the remote control logs by flight to improve log export efficiency.

• Added an animated prompt for tightening the aircraft arm sleeves.

• Added cache cleaning for Pilot App (such as: pictures, App logs).

• Adjusted to set the top and bottom vision system separately.

• Adjusted the auxiliary light to auto mode after turned off Discreet Mode.

• Adjusted the high wind warning display from the absolute direction to the direction relative to the

aircraft.

• Optimized the Enterprise Shield by adding auto activation and status checking.

• Added a vertical speed bar display to the FPV and camera view, improving the flight experience.

• Optimized the pre-flight check list by adding the status display of battery, RTK and other modules.

Advanced Dual Operator Mode

• Added functionality to control the zoom of the camera by using the joystick of the RC with gimbal

control.

• Add a pop-up prompt to indicate that the features that remote controller B is not supported, improving

the remote controller B operation experience.

• Optimized the display of the gimbal video transmission for the aircraft flight controller pilot. The remote

controller without gimbal control can show the camera type and zoom rate.

Video Transmission System