MATRICE 300 RTK Release Notes

ManualsBrandsDJI ManualsAerial MappingMatrice 300 RTK Industrial Aerial Mapping Drone

M300 RTK Release Notes

http://www.dji.com/matrice-300

later.

Released Date:

2020.11.26

Aircraft Firmware:

v01.00.02.14

Remote Controller Firmware:

v01.00.02.13

Pilot App Android

v1.9.0R

D-RTK 2 Mobile Station:

v03.00.00.13

Intelligent Battery Station:

v01.05.06.06

Intelligent Fight Battery:

v01.02.05.28

Zenmuse H20 / H20T:

v01.00.02.11

Zenmuse Z30:

v01.00.07.10

Zenmuse XT2:

v01.00.03.50

Zenmuse XT S:

v01.00.00.09

DJI X-Port:

v01.03.02.00

DJI Assistant 2 For Matrice:

v2.0.13

Firmware Upgrade Method:

Aircraft / Remote Controller: DJI Assistant 2 / App

Zenmuse H20 / H20T: microSD card / DJI Assistant 2 / App

D-RTK 2 Mobile Station: DJI Assistant 2

The built-in DJI Pilot app: will be updated with the Remote Controller

firmware

Intelligent Battery Station: App (Connect the Battery Station to the

remote controller and update it on the HMS page in the DJI Pilot app.)

What’s new？

Aircraft Firmware

• Improved GNSS stability when using the Custom Network RTK.

Notes

• Users who use Custom Network RTK MUST update to this firmware version. Otherwise, the aircraft will

work abnormally.

• The aircraft cannot revert to firmware version 01.00.02.11 or earlier once the firmware is updated.

• Make sure that the aircraft, remote controller, battery, D-RTK 2 mobile station (if used), payload (if used)

are updated to the latest firmware version.

• Download the latest firmware from official website to microSD card to update the ZenmuseZ30, XT S,

XT2 or H20 / H20T.