MATRICE 300 RTK Release Notes

ManualsBrandsDJI ManualsAerial MappingMatrice 300 RTK Industrial Aerial Mapping Drone

M300 RTK Release Notes

http://www.dji.com/matrice-300

Released Date:

2021.02.22

Aircraft Firmware:

v02.02.02.01

Remote Controller Firmware:

v02.02.01.02

Pilot App Android

v2.2.1.7

D-RTK 2 Mobile Station for Matrice:

v03.00.00.16 (D-RTK 2 Mobile Station: v02.02.0505)

Intelligent Battery Station:

v01.05.06.07

Intelligent Fight Battery:

v01.02.05.30

Zenmuse H20 / H20T:

v02.02.01.00

Zenmuse P1

v02.02.01.00

Zenmuse Z30:

v01.00.07.10

Zenmuse XT2:

v01.00.03.50

Zenmuse XT S:

v01.00.00.09

DJI X-Port:

DJI Skyport:

DJI Skyport V2:

v01.03.02.00

v01.04.00.00

v01.03.02.00

DJI Assistant 2 For Matrice:

v2.0.13

Firmware Upgrade Method:

Aircraft / Remote Controller: DJI Assistant 2 / App

Zenmuse H20 / H20T: microSD card / DJI Assistant 2 / App

D-RTK 2 Mobile Station: DJI Assistant 2

The built-in DJI Pilot app: will be updated with the Remote

Controller firmware

Intelligent Battery Station: App (Connect the Battery Station to

the remote controller and update it on the HMS page in the DJI

Pilot app.)

What’s new？

• Fixed issue: the absolute altitude value was incorrect in the metadata of photos taken by a PSDK camera

such as PSDK 102S.

Notes

• Users who use Custom Network RTK must update the aircraft firmware to v01.00.02.14 or later.

Otherwise, the aircraft will work abnormally.

• The aircraft cannot revert to firmware version 01.00.02.11 or earlier once the firmware is updated.

• Make sure that the aircraft, remote controller, battery, D-RTK 2 mobile station (if used), payload (if used)