MATRICE 300 RTK Maintenance Manual v1.0

12
©
2020 DJI All Rights Reserved.
MATRICE 300 RTK
Maintenance Manual
Data Ports
1. Clean the foreign objects near the ports with a
gauze.
2. If the port is in use, disconnect the cable, then
check if there are foreign objects in the port
with the help of a light.
3. Remove the foreign objects such as small
pieces of stones and pieces of paper in the
port using tweezers.
4. Clean the gluey foreign materials in the port
with a gauze.
5. Place the aircraft so that the port is facing
downward, and then use a tool such as a
gauze or brush to remove the powder materials
in the port. Note to sweep from the inside to the
outside.
Bottom View
Top View
Heat
Dissipation
Vents
1. There is no blockage in the heat dissipation
vents. The cooling fans work smoothly without
noise.
Bottom View
Top View
Rubber Port
Covers
1. The rubber port covers are not damaged or
loose.
Gimbal
Damping
Plate
1. The dampeners are not damaged, loose, or
aged.
The gimbal connector can rotate smoothly.
2. The screws connecting the damping plate and
aircraft body are secure.