MATRICE 300 RTK - Known Issue List v3.0

M300 RTK Known Issue List
http://www.dji.com/matrice-300
Copyright © 2020 大疆创新 版权所有 8
may take longer time.
be optimized in later versions.
version
v03.00.01.01
Resolved Issue Recording
Issue Description
Workaround solution
How its solved
1. 2
2
When a mapping mission is
paused either in flight or
while landing to swap
batteries, if the operator
tries to resume the mission,
a message will pop up that
says: "Map interactions
should happen on the UI
thread..." and they will not
be able to resume the
mission.
Change map service before starting mission
flight to resolve issue.
Click on the "..." of the top right corner of live
video screen of Pilot
Go to "..." in sub menu
Select "Mapbox" in "Map Switch", and plan the
mission on the map, save the mission
Then switch to "AMap"
Then you can execute the mission normally,
but will not have map imagery during the
mission with AMap.
If background map imagery is required during
the mission please use the Pilot PE app V1.8
available on the DJI Downloads website.
Solved in RC version
v02.02.01.02
2.
In Dual RC Mode, if the RC
has gimbal control only, the
gimbal pitch stick will
trigger camera zooming.
By assigning the Control Stick Mode of the RC
with gimbal control to Mode 2 this issue can be
avoided.
Can make this change in the Checklist or
Remote Controller Settings of the Pilot app.
Solved in RC version
v02.02.01.02