MATRICE 300 RTK - Known Issue List v3.0

M300 RTK Known Issue List
http://www.dji.com/matrice-300
Copyright © 2020 大疆创新 版权所有 6
Resolved Issue in This Version
N0.
Issue Description
Workaround solution
How its
solved
1.
Unable to set values in mission planning after
updating system.
Go into Apps (circle with the four
squares in it on the Smart
Controller Home Screen).
Then Settings
Scroll down to storage
Click on Apps
Click on Pilot app and then clear
data
Click the back button
Re-open the Pilot App and create
the mission, will then be able to
save the mission.
Note: This action will clean all the
missions in the mission library, so it
is suggested to back up all your
mission files first.
Solved in RC
version
v03.00.01.02
2.
When planning a Linear Flight Mission, if
Camera Type is not selected, you cannot click on
the map to add waypoints
Please select Camera Type first then
plan the flight area.
Solved in RC
version
v03.00.01.02
3.
In Obstacle Sensing settings, when the Obstacle
Braking Distance on the upward direction is set
to be >5m, the aircraft may still brake at a 5m
distance from the obstacle
Solved in
Aircraft
version
v03.00.01.01
4.
When a CSM Radar is connected to the aircraft,
the radar icon R is not shown on Pilot App.
Please check whether the radar
connection is tight, and try to restart
the aircraft and Pilot App.
Solved in
Aircraft
version