MATRICE 300 RTK - Known Issue List v3.0

M300 RTK Known Issue List
http://www.dji.com/matrice-300
Copyright © 2020 大疆创新 版权所有 2
Unsolved Issues In The Version V3
NO.
Issue Description
Workaround Solution
Released Date：2021.10.13; Aircraft Firmware：v03.00.01.01
1
Panorama function of Zenmuse H20
Series may not work when it is hot
swapped with the other payload while
aircraft is on, for example Zenmuse P1 to
Zenmuse H20 series.
Please restart the aircraft and try again
2
When using WIFI connection there are
two possible problems:
1. Network RTK service connection may
deteriorate when WIFI connection is
unstable.
2. WIFI signal may interfere with Image
transmission signal, which will
decrease quality and coverage of live
video.
NOTE: Network RTK is only available in
China mainland
Suggest to use 4G dongle to connect the network
4
The selection button of “Network RTK”
does not shown up in the [RTK]-[RTK
Service] on the Pilot APP, when the
aircraft is activated indoor.
NOTE: Network RTK is only available in
the China mainland
Put the aircraft and Remote Controller outdoor
Refresh GNSS statue
Check the [RTK] page on the Pilot APP
[Network RTK] button will automatically appear in
the list of [Select RTK Service Type]
It will be optimized in the later version
5
When CSM Radar is removed from
Aircraft and continue to execute the
Manual Flight or Mission Flight, the
remote controller makes a beeping
obstacle avoidance sound however there
Re-install the CSM Radar on the aircraft
Open the Pilot APP, Go into the Manual Flight
Find [Obstacle Sensing setting]
Go into [Horizontal] page
Click the [Horizontal Radar Obstacle Avoidance] off