MATRICE 300 RTK - Known Issue List v3.0

M300 RTK Known Issue List
http://www.dji.com/matrice-300
Copyright © 2020 大疆创新 版权所有 10
5.
When the Smart Controller
Enterprise is powered on,
you may find the date on the
RC to be Jan-18-2013
occasionally by mistake. This
will also impact the date &
time for the log that is saved.
Whenever you power on the RC, check
whether the date is correct or not. If it's wrong,
connecting the RC to Internet will sync the
network time and correct the date & time. Then
you can start the mission and the flight log will
be saved correctly. You can manually adjust
date & time in the system settings of the smart
controller enterprise alternatively when
internet is not available.
This issue will be solved in the next firmware
release of the M300 RTK.
Solved in RC version
v02.02.01.02
6.
During the flight, the live
video screen may turn black
for a few seconds, but the RC
signal is still good and has
not been lost.
The live video usually can recover by itself in a
few seconds. If not, please go to the recent app
page of Smart Controller Enterprise, swipe Pilot
App and reopen it.
Open the recent apps page of the Smart
Controller Enterprise by holding the back
button for 2 seconds and then while still
holding push the 5D button to the left.
Swipe up on the Pilot App to close it.
Reopen the Pilot App.
Solved in RC version
v02.02.01.02
7.
When creating a mission in
Mapping/Oblique/Linear
Flight Mission mode, you
cannot save the parameters
of a custom camera before
creating a mapping area.
First draw the mapping area on the map, then
you will be able to save the custom camera
parameters.
Solved in RC version
v02.02.01.02
8.
When connecting an
external tablet to Smart
Controller Enterprise and
running the Pilot App on it,
image/video playback and
download can be slow.
This issue will be addressed in the next
firmware version.
Solved in RC version
v02.02.01.02