M300 RTK Known Issue List M300 RTK Released Version In This List Released Date： 2021.10.13 Aircraft Firmware： v03.00.01.01 Remote Controller Firmware： v03.00.01.02 Pilot App Android： V3.0.1.4（M300） D-RTK 2 Mobile Station for Matrice： v03.00.00.16（D-RTK 2 Mobile Station：v02.02.0505） Intelligent Battery Station： v03.00.01.01 Intelligent Flight Battery： v01.02.05.31 Zenmuse H20/H20T： v03.00.01.02 Zenmuse P1： v03.00.01.04 Zenmuse L1： v03.00.02.00 Zenmuse Z30： v01.00.07.
M300 RTK Known Issue List Unsolved Issues In The Version V3 NO. Issue Description Workaround Solution Released Date：2021.10.13; Aircraft Firmware：v03.00.01.01 1 Panorama function of Zenmuse H20 Series may not work when it is hot swapped with the other payload while aircraft is on, for example Zenmuse P1 to Zenmuse H20 series. 2 When using WIFI connection there are two possible problems: Please restart the aircraft and try again Suggest to use 4G dongle to connect the network 1.
M300 RTK Known Issue List is no obstacle around. Restart the flight, the alarm is settled down. It will be optimized in the later verison。 http://www.dji.
M300 RTK Known Issue List Unsolved Issues In The Version V2.2 NO. Issue Description Workaround Solution Released Date：2021.03.03; Aircraft Firmware：v02.02.02.01 Go into Apps (circle with the four squares in it on the Smart Controller Home Screen). Then Settings Scroll down to storage Mission flight cannot be saved. 1. When trying to save a mission flight, there is a notification “table MAPPING_WAYLINE has no column named PHONE...".
M300 RTK Known Issue List Please disable the Sun Burn Protection function in the camera setting page. 1. 2. When H20T is aimed at an object with a high temperature, the Sun Burn Protection function may be triggered, and there will be an option to allow you to disable the protection. However, after you disable it, later the Protection will still be triggered. The DSM imported should be in .tif format, needs to be 20MB or smaller, with spatial resolution less than 10m.
M300 RTK Known Issue List Resolved Issue in This Version How its N0. Issue Description Workaround solution solved Go into Apps (circle with the four squares in it on the Smart Controller Home Screen). Then Settings Scroll down to storage Click on Apps 1. Unable to set values in mission planning after updating system. Click on Pilot app and then clear data Click the back button Solved in RC version v03.00.01.02 Re-open the Pilot App and create the mission, will then be able to save the mission.
M300 RTK Known Issue List v03.00.01.01 5. Solved in Aircraft version v03.00.01.01 During a mapping/oblique/linear flight mission, if you move the pitch stick on the RC, the aircraft heading will turn 180° Considering the anti-collision beacon may affect the shooting quality, so it is designed to be turned off during video shooting. 6.
M300 RTK Known Issue List may take longer time. be optimized in later versions. version v03.00.01.01 Resolved Issue Recording Issue Description 1. 2. When a mapping mission is paused either in flight or while landing to swap batteries, if the operator 2tries to resume the mission, 2a message will pop up that says: "Map interactions should happen on the UI thread..." and they will not be able to resume the mission.
M300 RTK Known Issue List 3. In the camera settings of the Zoom camera of the H20 Series, the option for Night Scene and 4K resolution are not displayed as options In some cases, the options related to the thermal camera are not displayed in the camera settings menu either. The display of menu for different cameras is not shown correctly on DJI Pilot occasionally.
M300 RTK Known Issue List 5. When the Smart Controller Enterprise is powered on, you may find the date on the RC to be Jan-18-2013 occasionally by mistake. This will also impact the date & time for the log that is saved. Whenever you power on the RC, check whether the date is correct or not. If it's wrong, connecting the RC to Internet will sync the network time and correct the date & time. Then you can start the mission and the flight log will be saved correctly.
M300 RTK Known Issue List 9. When taking a screen recording on the Smart Controller Enterprise, you cannot record the sound. Sound recording will be supported in later firmware versions. Please confirm that the gimbal camera is connected to the 1st gimbal port of M300 RTK. In Mapping/ Oblique/ 10. Linear Flight Mission mode, the camera is not taking photos during the flight. In Mapping/Oblique/Linear Flight Mission mode, only the payload connecting to 1st gimbal port can take photos.
M300 RTK Known Issue List With aircraft version v02.02.01.02, the absolute altitude value was incorrect 13. in the metadata of photos taken by a PSDK camera / Solved in aircraft version v02.02.02.01 such as PSDK 102S. http://www.dji.
