Manual
Table Of Contents
- Legends
- Product Profile
- Aircraft
- Intelligent Battery Charging Hub
- Intelligent Battery
- Gimbal Camera
- Remote Controller
- Preparing the Remote Controller
- Starting and Activating the Remote Controller
- User Interface
- Video Transmission
- Remote Controller LEDs and Alert
- Charging the Remote Controller and Checking the Battery Level
- Linking the Remote Controller and Control Stick Modes
- Buttons Overview
- Flight Mode Switch (N/S/F)
- Calibrating the Compass
- HDMI Settings
- Dual Control Mode
- DJI Professional Ecosystem
- DJI Pilot 2 App
- Flight
- Appendix
- Appendix
DJI Inspire 3
User Manual
98
©
2023 DJI All Rights Reserved.
20. Waypoint Pro: tap to enter the ight rout library, users can view and edit the ight route or
create new ight routes. Read the Waypoint Pro section for more information.
21. Gimbal Mode: displays that the current state of the gimbal is Follow mode. Tap to switch to
the Free mode. Refer to the Gimbal Camera section for a detailed description of each mode.
22. Auto Takeo/Auto RTH: tap the / icon then long press to enable Auto Takeo/Auto RTH.
• Tap anywhere on the screen and hold until a blue circle appears, drag the circle in any
direction and the gimbal will rotate or tilt accordingly.
• Observe the focus frame color to learn the current focus status in AF mode.
Top Bar
1. Back: tap to return to the home screen of the DJI Pilot 2 app.
2. System Status Bar: displays aircraft ight status and various warning messages. If an alert
appears during ight, it will be displayed in the system status bar and continue ashing. Tap
to view the message, and the ashing will stop.
3. Flight status:
a. The flight statuses include standby, preparing to take off, ready to go, manual flight,
returning to home, landing, forced landing, and vision positioning.
b. When the aircraft is in vision positioning, standby, or manual ight status, the current
ight mode will be displayed, including N, S, A, and T modes.
4. Intelligent Battery Information: displays the battery level and remaining ight time of the
Intelligent Battery. Dierent battery levels are represented by dierent colors. When the
battery level is lower than the warning threshold, the battery icon on the right turns red,
reminding the user to land the aircraft as soon as possible and replace the batteries.
5. Landing Gear: displays the current landing gear status, tap to set the intelligent landing
gear.
6. Obstacle Avoidance Status: displays the current obstacle avoidance status of the aircraft
vision systems.
a. White: obstacle avoidance is enabled and is functioning normally.
b. Gray: obstacle avoidance is disabled.
c. Red: obstacle avoidance is enabled but failed.
7. GNSS Positioning Status: displays the number of searched satellites. When the aircraft
RTK module is disabled, the RTK icon will turn gray. When enabled, the RTK icon will turn
white. Tap the GNSS positioning status icon to view the RTK mode and GNSS positioning
information.
1 2 3 5 6 7 8 9 104