Manual
Table Of Contents
- Legends
- Product Profile
- Aircraft
- Intelligent Battery Charging Hub
- Intelligent Battery
- Gimbal Camera
- Remote Controller
- Preparing the Remote Controller
- Starting and Activating the Remote Controller
- User Interface
- Video Transmission
- Remote Controller LEDs and Alert
- Charging the Remote Controller and Checking the Battery Level
- Linking the Remote Controller and Control Stick Modes
- Buttons Overview
- Flight Mode Switch (N/S/F)
- Calibrating the Compass
- HDMI Settings
- Dual Control Mode
- DJI Professional Ecosystem
- DJI Pilot 2 App
- Flight
- Appendix
- Appendix
DJI Inspire 3
User Manual
©
2023 DJI All Rights Reserved.
97
frame rate (project frame rate/sensor frame rate in S&Q mode).
d. Displays the le name of the photo or video currently being shot or about to be shot, the
remaining photo number/recording time, and the remaining capacity.
e. Displays the current lens focal length.
f. Displays the current timecode. The timecode display format is “hour: minute: second:
non-drop frame” or “hour: minute: second; drop frame”.
g. Displays the current focus mode. Tap to switch to AFS or MF.
h. AE lock switch.
4. Playback: tap to enter the aircraft album to view the photos or videos in the aircraft SSD
and the local video cache of the remote controller. Among them:
JPEG: supports to be downloaded and played back.
RAW: supports to be downloaded, but only thumbnail played back.
J+R: only JPEG photos are supported to be downloaded and played back.
5. Photo/Video Mode Settings: tap to switch between photo and video modes and select
dierent shooting options.
6. Shutter/Record Button: tap to take a photo or start or stop recording.
7. Gimbal Slider: displays the tilt angle of the gimbal.
8. Camera Quick Settings Panel: tap to set the camera exposure, color, and recording
specications. Read the Camera Quick Settings Panel section for more information.
9. MF Scrollbar: used for manual focus operation.
10. By default, press the R1 button to lower or raise the landing gear.
11. By default, press the R2 button to switch between the camera view and the map view.
12. By default, press the R3 button to switch between the gimbal camera view and the FPV
camera view.
13. Assistant Camera View: tap to switch the main camera view to the FPV camera view or the
gimbal camera view. Supports zooming out.
14. OSD Parameters: displays the horizontal distance, vertical distance, horizontal speed, and
vertical speed.
Horizontal distance: displays the horizontal distance between the aircraft and the Home
Point.
Vertical distance: displays the altitude of the aircraft relative to the takeo point.
Horizontal speed: displays the current horizontal speed of the aircraft.
Vertical Speed: displays the current vertical speed of the aircraft.
15. Navigation Display: displays aircraft, gimbal status, remote controller, Home Point, and
obstacle avoidance information. Read the Navigation Display section for more information.
16. By default, press the L3 button to enable the Scroll Wheel to adjust the Iris.
17. By default, press the L2 button to enable the Scroll Wheel to adjust the Shutter.
18. By default, press the L1 button to enable the Scroll Wheel to adjust the EI/ISO.
19. Spotlight Pro: tap to enable Spotlight Pro to lock the camera orientation and look at the
selected target. Read the Spotlight Pro section for more information.