Manual

DJI Inspire 3 User Manual
©
2023 DJI All Rights Reserved.
85
• Read the DJI Video Transmitter User Guide for more information.
• When using the remote controller with the video transmitter, keep a distance of at least
50 cm between them to avoid signal interference. If the remote controller signal still has
interference, set the channel mode of the video transmitter to the DFS channel. Read
the DJI High-Bright Remote Monitor User Guide for more information.
DJI High-Bright Remote Monitor
In Dual Control mode, the aircraft can link with a DJI RC Plus remote controller and a DJI High-
Bright Remote Monitor, while the monitor can be used to observe the liveview and adjust the
parameters.
Linking
1. Power on the remote monitor. Tap to enter System Settings, and then Connection
Settings. Select Control Mode, set the monitor as Control Monitor B, and tap Link to Control
Monitor B to enter linking status.
2. Press and hold the power button on the aircraft for at least ve seconds. The aircraft power
indicator will blink and beep twice to indicate that linking has started. When linking is
successful, the aircraft rear indicators will blink green while the remote monitor will show a
connected status.
DJI Professional Ecosystem
DJI Inspire 3 can be used with other DJI products (sold separately), such as DJI Video Transmitter,
DJI High-Bright Remote Monitor (abbreviated as remote monitor), DJI Three-Channel Follow
Focus, and DJI Master Wheels to form a professional lm ecosystem.
DJI Video Transmitter
Connection: connect the remote controller with the DJI Video Transmitter using an HDMI cable.
Usage: once connected, the liveview will be available to display on the remote monitors after
linking the remote monitor to the video transmitter.