Manual
Table Of Contents
- Legends
- Product Profile
- Aircraft
- Intelligent Battery Charging Hub
- Intelligent Battery
- Gimbal Camera
- Remote Controller
- Preparing the Remote Controller
- Starting and Activating the Remote Controller
- User Interface
- Video Transmission
- Remote Controller LEDs and Alert
- Charging the Remote Controller and Checking the Battery Level
- Linking the Remote Controller and Control Stick Modes
- Buttons Overview
- Flight Mode Switch (N/S/F)
- Calibrating the Compass
- HDMI Settings
- Dual Control Mode
- DJI Professional Ecosystem
- DJI Pilot 2 App
- Flight
- Appendix
- Appendix
DJI Inspire 3
User Manual
©
2023 DJI All Rights Reserved.
67
1. Push the rear cover release button to the end to open the rear cover. Remove the screws to
open the dongle compartment.
2. Insert the dongle into the USB-C connector. Close the dongle compartment.
3. Attach the dongle compartment with the screws. Close the rear cover.
Using the Strap and Waist Support
A strap can be mounted onto the waist support by following the steps below.
Mounting the Dongle
A Dongle (excluded) can be mounted onto the remote controller in the following steps.
1. Unfold the two handles.
2. Wear the strap, and attach the strap hooks to the handle holes.
3. Unfold the waist support.
• After use, hold the remote controller with one hand, unlock the strap hooks with the
other hand to remove the remote controller, and then take o the strap.
1
2
3