Manual
Table Of Contents
- Legends
- Product Profile
- Aircraft
- Intelligent Battery Charging Hub
- Intelligent Battery
- Gimbal Camera
- Remote Controller
- Preparing the Remote Controller
- Starting and Activating the Remote Controller
- User Interface
- Video Transmission
- Remote Controller LEDs and Alert
- Charging the Remote Controller and Checking the Battery Level
- Linking the Remote Controller and Control Stick Modes
- Buttons Overview
- Flight Mode Switch (N/S/F)
- Calibrating the Compass
- HDMI Settings
- Dual Control Mode
- DJI Professional Ecosystem
- DJI Pilot 2 App
- Flight
- Appendix
- Appendix
DJI Inspire 3
User Manual
66
©
2023 DJI All Rights Reserved.
Remote Controller
Preparing the Remote Controller
Mounting the WB37 Intelligent Battery
A WB37 Intelligent Battery (excluded) can be mounted onto the remote controller in the
following steps.
1. Push the rear cover release button to the end to open the rear cover.
2. Insert the WB37 battery into the battery compartment and push it to the top. There will be a
clicking sound to indicate the battery is installed rmly.
3. Close the rear cover.
• To remove the WB37 battery, press and hold the battery release button and push the
battery downward.
• Refer to the WB37 Intelligent Battery Safety Guidelines for more information.
WB37 Intelligent Battery Specications
Capacity 4920 mAh
Voltage 7.6 V
Battery Type Li-ion
Energy 37.39 Wh
Chemical System LiCoO2
1
2
3
Battery Release Button