Manual
Table Of Contents
- Legends
- Product Profile
- Aircraft
- Intelligent Battery Charging Hub
- Intelligent Battery
- Gimbal Camera
- Remote Controller
- Preparing the Remote Controller
- Starting and Activating the Remote Controller
- User Interface
- Video Transmission
- Remote Controller LEDs and Alert
- Charging the Remote Controller and Checking the Battery Level
- Linking the Remote Controller and Control Stick Modes
- Buttons Overview
- Flight Mode Switch (N/S/F)
- Calibrating the Compass
- HDMI Settings
- Dual Control Mode
- DJI Professional Ecosystem
- DJI Pilot 2 App
- Flight
- Appendix
- Appendix
DJI Inspire 3
User Manual
24
©
2023 DJI All Rights Reserved.
Aircraft Power Button/Indicators
1. Power Button (after mounting the intelligent batteries):
a. Press the power button once to check the current aircraft battery level.
b. Press, and then press and hold for two seconds to power the aircraft on or o.
c. Press the power button a minimum of ve times to unlock or enter the travel mode.
2. Indicators: display the current aircraft battery level or the aircraft status.
The Battery Level Indicators will also show the current battery level during discharging. The
indicators are dened below.
: LED is on. : LED is o. : LED is ashing.
Battery Level
LED1 LED2 LED3 LED4 Battery Level
88%~100%
75%~87%
63%~74%
50%~62%
38%~49%
25%~37%
13%~24%
0%~12%
Aircraft Status
LED1 LED2 LED3 LED4 Description
Aircraft status error. Connect to the remote
controller, run DJI Pilot 2, and tap HMS to
diagnose the error.
Aircraft rmware is updating.
Aircraft and remote controller are linking.
1
2