Manual
Table Of Contents
- Legends
- Product Profile
- Aircraft
- Intelligent Battery Charging Hub
- Intelligent Battery
- Gimbal Camera
- Remote Controller
- Preparing the Remote Controller
- Starting and Activating the Remote Controller
- User Interface
- Video Transmission
- Remote Controller LEDs and Alert
- Charging the Remote Controller and Checking the Battery Level
- Linking the Remote Controller and Control Stick Modes
- Buttons Overview
- Flight Mode Switch (N/S/F)
- Calibrating the Compass
- HDMI Settings
- Dual Control Mode
- DJI Professional Ecosystem
- DJI Pilot 2 App
- Flight
- Appendix
- Appendix
DJI Inspire 3
User Manual
110
©
2023 DJI All Rights Reserved.
1
2
3
4
Spotlight Pro Usage
1. Enabling Spotlight Pro:
tap to enable or disable Spotlight Pro.
2. Selecting the Target:
a. Drag-Select Target: after enabling Spotlight Pro, tap and drag on the screen to select a
target. If the target is too small or not identied, drag-select target may fail.
b. Tap-Select Target: after enabling the Target Scanning in the Flight Control Settings, the
target will be identied and displayed in the app, tap to track the target.
3. Tracking the Target:
after selecting the target, tap the Track button next to the target
frame or press the C2 button on the remote controller to start tracking the target.
4. Tap
to reselect the target.
• When the target is blocked or beyond the screen, the app will predict the target
position and track the position.