Manual
Table Of Contents
- Legends
- Product Profile
- Aircraft
- Intelligent Battery Charging Hub
- Intelligent Battery
- Gimbal Camera
- Remote Controller
- Preparing the Remote Controller
- Starting and Activating the Remote Controller
- User Interface
- Video Transmission
- Remote Controller LEDs and Alert
- Charging the Remote Controller and Checking the Battery Level
- Linking the Remote Controller and Control Stick Modes
- Buttons Overview
- Flight Mode Switch (N/S/F)
- Calibrating the Compass
- HDMI Settings
- Dual Control Mode
- DJI Professional Ecosystem
- DJI Pilot 2 App
- Flight
- Appendix
- Appendix
DJI Inspire 3
User Manual
10
©
2023 DJI All Rights Reserved.
Using for the First Time
Activating and Charging the Batteries
The Intelligent Batteries and remote controller internal battery require activation before rst use.
The remote controller cannot be powered on before activating the internal battery.
Insert the Intelligent Batteries into the charging hub, connect the charging hub to the remote
controller using the USB-C to USB-C high-speed data cable, and then connect the charging hub
to a power outlet. The Intelligent Battery is activated after the charging hub is connected to the
power outlet. The battery level LEDs start to ash to indicate that the remote controller internal
battery is activated.
Preparing the Aircraft
1. Remove the protective covers from the aircraft battery compartment, and insert two
activated Intelligent Batteries. Make sure the batteries are mounted rmly.
65W OUT