Quick Start Guide

EN
6
©
2018 DJI OSMO All Rights Reserved.
RONIN-S Quick Start Guide
2. Balancing Depth for the Tilt Axis
a. Rotatethetiltaxissothatthecameralensispointingforward.Holdthetiltmotortocheckifthe
cameraistoporbottomheavy.
b. Togglethelever
1
totheunlockedposition.Adjustthecamerabalance
2
untilthecamera
staysstillwhenrotatingthetiltaxis45°upwardsordownwards.
c. Togglethelever
3
tothelockedposition.
3. Balancing the Roll Axis
a. Releasethetiltmotortocheckthedirectioninwhichthemotorswings.
b. Loosentherollaxisknob
1
andadjustthecamerabalance
2
untilthecamerastaysstill.Ifthe
adjustmentonthisaxisistoosti,youcantrytorelievetheweightontherollmotorbyeither
liftinguponthecameraplatformwhilemakinganadjustmentortiltthegimbalbackalittleuntil
therollarmisparallelwithground.
c. Tightentheknob.
1
2
3
2
1