Quick Start Guide

EN
©
2018 DJI OSMO All Rights Reserved.
5
RONIN-S Quick Start Guide
2. Attach the camera dovetail plate and lens support*.
3. Slide the camera onto the camera mounting base. When a rough back and forth balance is
reached, toggle the lever to the locked position after the safety lock is engaged.
4. It is recommended to mount the camera using the Top Hotshoe Bracket when mounting the
gimbal on a car or shooting in environments when traveling at high speeds where wind forces
can affect the gimbal stability. The Top Hotshoe Bracket is sold separately. The installation is
shown below.
1
2
3
4
5
2
1
Balancing
1. Balancing the Vertical Tilt
a. Rotatethetiltaxissothatthecameralensispointingup.Holdthetiltaxismotortoensurethe
rollaxisremainshorizontalandcheckifthecameraistoporbottomheavy.
b. Loosentheknob
1
onthetiltmotorandadjustthecamerabalance
2
untilthecamerastays
stillwithouttiltingitupordown.
c. Tightentheknob.
2
1
* For the best results during setup, use the lens support whenever possible.