Owner's Manual

© 2016 DJI All Rights Reserved.
5
Installation
Getting Started
The Zenmuse Z3 can be used with the following DJI aerial platforms:
DJI Inspire 1 series
Matrice 100
Matrice 600
Supported Micro SD Cards
The Zenmuse Z3 comes with a 16GB Micro SD card, but also supports Micro SD
cards with a capacity of up to 64GB. We recommend using a UHS-1 Micro SD card
to minimize the delay when reading and writing high resolution video data.
DO NOT remove the Micro SD card from the Zenmuse Z3 when it is
powered on.
Installing the Zenmuse Z3
1. Remove the Gimbal Cap.
2. Rotate the Gimbal Lock on the Inspire 1 to the unlocked position. Align the white
lines and insert the gimbal.