FAQ
Accessories
What is a Ronin Grip? How do I use it?
The DJI Ronin Grip is an accessory designed for convenient placement and transportation of the
Ronin series. It comes in two sizes, one for the Ronin and one for the Ronin-M and Ronin-MX.
A larger grip surface allows easy transfers of the Ronin between camera ops, making it ideal for long
takes. When not in use, the entire Ronin-MX can be placed against a wall or car, making it possible
to pause during a shoot without the Ronin stand.
What is the SRW-60G? Why do I need that?
The SRW-60G is an accessory designed for short-range (approx. 10m) video transmission. It
enables video data to be transmitted from the camera to the Lightbridge 2, giving the pilot a live HD
view of the camera on the M600. By using different types of transmission cables, you can also use
the SRW-60G as a short range video transmitter for other uses than with the Ronin-MX. The SRW-
60G unit is prohibited for ight in North America.
What is a Remote Start/Stop?
The DJI Remote Start/Stop is an accessory designed for remotely controlling the camera start/stop
during video recording, and shutter control for still photography. When used in the air with the Ronin-
MX and M600, it can control the camera up to the maximum range of the Lightbridge 2 (3.1 miles).
What is the maximum range over which I can control the camera focus
when mounted on the Ronin-MX?
When using the Lightbridge 2 and the DJI Focus with Focus Expansion, the focus/aperture can be
controlled over a range of up to 3.1 miles (5 km). When connected directly to the DJI Focus, the
control range is about 100 m.
DJI GO
When used with the M600, is it possible to congure SmoothTrack™
and other settings for the Ronin-MX within DJI GO?
Yes. Other than controlling the M600 and its Intelligent Flight Modes, remote control modes and
seeing the camera’s live HD view, you can adjust the Ronin-MX’s SmoothTrack™ settings through
DJI GO. Camera proles are also created for different cameras (i.e. for RED and DSLR cameras),
saving you time when switching between different cameras.
How do I control the Ronin-MX through DJI GO when mounted to the
M600?
When using DJI GO with the M600 and Ronin-MX, you use it in the same way as with the Lightbridge
2 remote controller for other DJI products.