User Manual

Table Of Contents

The Mounting

Mounting the Lens

Lens Camera Lens Retaining Ring

Step 1: Mount the lens on the retaining ring first, before mounting the lens to the camera.

Mounting the Camera onto the Gimbal

Step2: Mount the camera into the gimbal. Tighten the Camera Mounting Screw first then tighten the Lens

Retaining Ring Screw.

Note: Take care when pushing the lens into the lens mount position; too much force may damage the lens.

Mounting the Gimbal to the Landing Gear

Please adhere to the dimensions of the gimbal shown below to mount the gimbal to a proper Landing Gear using

the mounting brackets (4) and M2.5*8 screws (8).

Camera Mounting Screw

Lens Retaining Ring Screw