User Manual

Ronin-S

User Manual

Be sure the Ronin-S is not powered on when plugging/unplugging the RSS

cable. Failure to do so may burn out the cable.

When connecting to cameras with the USB cable, be sure to power on the

Ronin-S prior to powering on the camera. Otherwise, camera control may fail.

Mounting a Camera

Before mounting the camera, make sure it is prepared ahead of time. Remove the lens

cap and make sure the camera's battery and memory card are already inserted.

1. Attach the riser plate* to the bottom of the camera using a athead screwdriver or coin.

2. Attach the camera mounting plate and lens support. For the best results during

setup, use the lens support whenever possible.

3. Slide the camera onto the camera mounting base. When a rough back and forth

balance is reached, toggle the lever to the locked position after the safety lock is

engaged.

* Mount the riser plate if needed.