User Manual
Ronin-S
User Manual
22
©
2018 DJI OSMO All Rights Reserved.
Status
Displays the real-time status of the
gimbal, connected devices, and
batteries.
About
Displays your account information,
rmware version, and more.
Button Functions
Power Button
1. Press and hold to power on the gimbal.
2. Press twice to pause the gimbal’s motors, and press twice again to unpause.
M Button
1. Press once to switch the user proles.
2. Press and hold to enter Sport mode.
3. Rapidly press six times to restore the applied user prole and the Bluetooth password
to default settings.
Trigger
1. Press and hold to enter Lock mode.
2. Press twice to re-center the gimbal.
3. Press three times to turn the gimbal 180° so that the camera faces you.
4. Press four times and hold to begin Joystick Calibration.
Joystick calibration is only required if the gimbal drifts (if the gimbal moves by itself
without input from the joystick). During calibration, push and pull the joystick several
times as far as it will go in all directions. Press four times and hold the trigger again to
complete calibration.
The calibration has failed if the LEDs blink red. If they do try to go through the
calibration process again.
5. Press and hold Ronin-S’ M button and trigger simultaneously for four seconds to start
Auto Tune. The default Auto Tune grade is Medium.
Joystick
The joystick is already set to default: push the joystick up or down to control the
movement of the tilt axis, and push it left or right to control the movement of the pan axis.
Go to the Control page to adjust the parameters for the pan, tilt and roll axes.