User Manual

Ronin-S
User Manual
©
2018 DJI OSMO All Rights Reserved.
9
Balancing Depth for the Tilt Axis
1. Rotate the tilt axis so that the camera lens is pointing forward. Hold the tilt motor to
check if the camera is front or back heavy.
2. Toggle the lever
1
to the unlocked position. Adjust the camera balance
2
until the
camera stays still when rotating the tilt axis 45° upwards or downwards.
3. Toggle the lever
3
to the locked position.
1
2
3
Balancing the Roll Axis
1. Release the tilt motor to check the direction in which the motor swings.
2. Loosen the roll axis knob
1
and adjust the camera balance
2
until the camera stays
still. If the adjustment on this axis is too stiff, you can try to relieve the weight on the roll
motor by either lifting up on the camera platform while making an adjustment or tilt the
gimbal back a little until the roll arm is parallel with ground.
3. Tighten the knob.
2
1