User Manual

Operation Modes

There are two operation modes for the Ronin 2: 3-Axis mode and Pan Lock mode.

3-Axis Mode

3-Axis mode is the standard, default mode. The Ronin 2 can be used in this mode without

any adjustments.

Pan Lock Mode

Pan Lock mode is specially designed for using the Ronin 2 with Steadicams. To use Pan

Lock mode:

1. Select the Handheld Mounting mode.

2. Enter the Settings page via the built-in touch panel and select “Pan Lock,” and then

the pan motor will shut off.

3. Lock the pan axis. The Ronin 2 will now work in Pan Lock mode.

4. The pan axis cannot stabilize itself in Pan Lock mode, use a Steadicam stabilizer if

needed.

5. The roll axis can rotate 360° in Pan Lock mode.

6. To properly use Pan Lock mode, the pan axis locking accessory should be installed.

Please visit the ofcial DJI Online Store for more details.

Usage with a DJI A3 Flight Controller and Lightbridge

The Ronin 2 can be mounted to an aircraft with a DJI A3 Flight Controller and Lightbridge.

Connect the Ronin 2’s 14.4 V power/accessory port to the A3 Flight Controller, and

connect the Ronin 2’s CAN port to Lightbridge.

Maintenance

The Ronin 2 is a precise machine, and its power/data ports are not waterproof. Be sure

to protect them from dust and water during use. After use, it is recommended to wipe the

Ronin 2 down with a soft dry cloth. Never spray any cleaning liquids onto the Ronin 2.