User Manual

Ronin 2 User Manual
34
©
2017 DJI OSMO All Rights Reserved.
10. Neck Strap Bracket
11. Prole Switch
Switch between various proles.
12. C2 Button
13. Record Button
Press once to start/stop recording.
14. USB Type-C Port
For charging and updating rmware.
15. Battery Level Indicators
Displays the current battery level.
16. Handle
17. Accessory Mounting Hole
1/4”-20 thread.
18. CAN Port
19. C1 Button
Binding the Remote Controller
The remote controller is bound to the gimbal by default. If using a new remote controller,
follow the steps below to begin binding.
1. Power on the gimbal and remote controller.
2. Enter the Settings page via the built-in touch panel and select “Bind Remote” Within 30
seconds, press C1, C2, and the Record Button simultaneously on the remote controller
until you hear a continuous beep.
3. The status LED will glow solid green once a successful connection is established.
When using the remote controller, ensure that the antenna is at least 20 cm away
from any person or object to provide the best wireless connection.
Profile
General
More
Settings
Remote Freq.
Bind Remote
2.4HzStart
ON
Axis Mode
3-axis
Calibrate System
60%
212
0º
Speaker
＋
－
PAN
＋－
ROLL
REC
ROLL
MODE
RONIN
POWERED BY
Free
Follow
Recenter
＋
－
TILT
PROFILE
Default
User 1
User 2
C1 Button C2 Button
Record Button