User Manual

Ronin 2

User Manual

The Top Mounting Block replaces the center handle on the Ronin 2 Grip. It has 1/4"-20 holes

allowing third party handles and accessories to be attached.

The Universal Mount offers an attachment point for the gimbal allowing it to be mounted to

various platforms such as a jib, vehicle mount, or cable cam.

Do not use unauthorized accessories/cables as they may harm your Ronin 2 and

void your warranty.

* To control the RED camera, connect the RCP Control Cable to the CTRL Port of the

camera. Go to Menu > Settings > Setup > Communication. Select the Serial tab and

then choose REDLINK Command Protocol from the Serial Protocol drop-down menu.

RED camera rmware V5.3.49 or above is required.