User Manual
A3/A3Pro
User Manual
12
©
2016 DJI. All Rights Reserved.
Mounting the GPS-Compass Pro Module
Follow the procedures below to mount the GPS bracket and the GPS-Compass Pro module.
The GPS-Compass Pro module included in the Upgrade kits is the same as the one in the A3
package.
1. Use the M2.0×4 screws to assemble the GPS bracket with the Ball End Hex Key assistant.
The longest one is recommended.
2. With the M2.5×7 screws and M2.5×3.4 nuts, mount the bracket on the aircraft.
Usage Requirements
1. The DJI logo should be facing the sky, with the orientation arrow pointing directly to the nose
direction; otherwise you may experience take o failure.
2
.
Fly the aircraft in an open space without buildings or trees; otherwise the GPS may be aected.
3. The compass is sensitive to magnetic interference. Always keep the compass module away
from magnetic elds. Otherwise, the compass module may become damaged and lead the
aircraft to work abnormally or even lose control.
Mounting the LED Module
Mount the LED module in a position to ensure it remains visible during flight. The LED bracket
included can be used to x the LED module onto the aircraft.
3. Ensure the GPS-Compass Pro arrow is pointing to the aircraft nose and then x it onto the top
of the GPS bracket. Try to keep it parallel to the aircraft.