User Manual

5. Select the “Basic” option. Please follow step-by-step for your first-time-configuration. Basic configuration

is necessary. Click the icon to get the configuration details.

6. You can click the “Advanced” option for more parameter settings. Advanced setting is optional. There are

Motor, F/S, IOC, Gimbal, Voltage, Limits, Gear, etc.

7. Check all parameters in the View page.

8. Select “More” to obtain more details. Including: Restore MC default settings, Accounts, Main Controller

List, Information, wiki, Rate DJI Assistant, FAQ, Feedback, About.

1. Make sure to upgrade the LED-BT-I module to the latest firmware via the PC Assistant software

on a PC before you use the DJI Assistant App with the A2 Flight Control System.

2. Every time you run the DJI Assistant App, the App will search the Controller Unit automatically.

3. The gain value displayed on Mobile Device and PC may be a little different, that is OK for use.

Step 3 Flying Test Procedures

1. Get the aircraft ready, run the DJI Assistant and make sure it is connected with the main controller. (The

indicators on the DJI Assistant are )

2. Start the motors.

3. The “View” page shows the relative parameters real-time when flying.

4. Go to the “Basic” and click into the “Gain” page to set the values of all gains real-time during flying.

5. Go to the “Basic” and click into the “Tool” page to view the values of IMU & Compass real-time during

flying.

6. Finish the flying and land your aircraft.

Only the parameter referred above can be changed during flying. Others can be configured after

landing.