Owner's Manual
Table Of Contents
- User Manual
- Using This Manual
- Legends
- Read Before First Usage
- Video Tutorials
- Download the DJI Assistant 2
- Product Profile
- Introduction
- At a Glance
- Installation and Wearing
- Usage
- Operating Control
- Connection
- Screen
- Viewing Photos and Videos
- Charging the Goggles RE
- Upgrading Firmware
- DJI Assistant 2
- DJI GO 4 App
- Cleaning and Maintenance
- Cleaning the Goggles RE
- Maintenance of Lenses
- Quick Start Guide
- In the Box
- Disclaimer & Safety Guidelines
14
© 2019 DJI All Rights Reserved.
DJI Goggles Racing Edition
User Manual
If
the remote controller and Goggles RE are operated by one person but for two users, a
spotter who is able to instruct and give warning is required for safe flying.
Only the primary remote controller can switch flight modes.
Secondary Goggles RE do not support head tracking.
If two operators control the aircraft simultaneously, the commands from the main secondary
remote controller takes priority of aircraft movements (control sticks and gimbal dial). The
auxiliary secondary
remote controller only works if the main secondary remote controller is
not being operated for more than two seconds, whereas the main secondary remote
controller can always override it to regain control. The two remote controllers follow the same
priority for other commands.
If the Goggles RE are powered off or disconnected from the aircraft for more than 30
seconds during flight, the Goggles RE's corresponding secondary remote controller will
replace it to control the aircraft. Note that there is still no live view on the DJI GO 4 app
connected to the secondary remote controller.
Goggles RE (secondary) Goggles RE
(primary)
√ Live View
√ Head Tracking
√ Intelligent Flight
Mode
Remote
Controller
(main secondary)
√ Live View
√ Intelligent Flight Mode
×
Head Tracking
Remote Controller
(auxiliary secondary)
+2 s
Can't switch ight
modes.
No live view, only
support settings.
No live view,
only support
settings.
5. Press the Link button on the aircraft. Once linked, the linking status indicator will turn solid green.
6. Select “Connect Remote Controller” and confirm in Goggles RE.
7. Power on the auxiliary secondary remote controller
and connect it with the mobile device.
8. Launch the DJI GO 4 app and enter the camera view. Press , then select “Remote Controller
Linking > Secondary Remote Controller,” for successful linking in a few seconds.
Multiuser Mode
Multiuser Mode is suitable for dual (or more) aircraft operator control. In this
mode, the Goggles RE
operators with a
secondary
remote
controller can view the environment in real-time FPV for more
intuitive control. Please note that only the Goggles RE will display live view and that the primary
Goggles RE only support head tracking.