DJI GOGGLES Racing Edition User Manual 2019.04 V1.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section. Printing this Document This document supports high resolution printing.
Contents Using This Manual 2 Legends 2 Read Before First Usage 2 Video Tutorials 2 Download the DJI Assistant 2 2 Product Profile 4 Introduction 4 At a Glance 4 Installation and Wearing 6 Usage 7 Operating Control 7 Connection 8 Screen 16 Controlling the Aircraft 19 Viewing Photos and Videos 20 Charging the Goggles RE 22 Upgrading Firmware 24 DJI Assistant 2 24 DJI GO 4 App 24 Cleaning and Maintenance 25 Cleaning the Goggles RE 25 Maintenance of Lenses 25 Specifi
Product Profile Introduction DJI Goggles Racing Edition (abbreviated as “Goggles RE”) are equipped with high-performance displays and an ultra-low latency video downlink for use with DJI aircraft, giving you a real-time aerial FPV (First Person View) experience. Goggles RE can also be used to play HD videos, bringing you an immersive high-definition viewing experience.
DJI Goggles Racing Edition User Manual DJI OcuSync Air Unit 1 3 2 1. Camera Port* Connects to the DJI OcuSync Camera. 2. S.Bus Port Connects with the 3-in-1 Cable (Power, S.Bus, UART), and connects to the power, flight controller, and OSD port based on the information below. RED: Power BLACK: Power GND WHITE: UART RX (Connects to OSD TX) GRAY: UART TX (Connects to OSD RX) BROWN: Signal GND YELLOW: S.Bus (Connects to Flight Controller RX) 3.
Installation and Wearing 1. Insert the Headband into the slot above the Goggles RE body until you hear a click. Now check that it has been securely fastened. Click Press the Headband Buckle and move it in the opposite direction to release the Headband. 2. Align the lenses over your eyes and pull the Headband down. Adjust the Headband Knob until the Goggles RE fit snugly and comfortably on your face and head. Goggles RE can be worn over glasses.
Usage Operating Control [1] Power Button Press the power button once, then press it again and hold to turn the Goggles RE on/off. Battery level indicators will display the current battery level. Low Battery Level High [2] Battery Level Indicators When the battery is powered off, press the power button once to light up the battery level indicators to display the current battery level. The battery level indicators will also show the current battery level during charging and discharging.
DJI Goggles Racing Edition User Manual [4] Charging Status Indicator This indicates the current charging status. The LED will be solid red, yellow or green to reflect low, medium, and high power levels respectively. Blinking Red Solid Red Solid Yellow Solid Green Headband abnormal 0~29% 30~89% 90~100% [5] Back Button Press this to return to the previous menu, or exit the current Intelligent Flight Mode. [6] Function Button For DJI aircraft that support focus (e.g.
DJI Goggles Racing Edition User Manual 2. Power on the Goggles RE, swipe downward with two fingers on the touch panel to enter the shortcut menu and select “Racing Drone (Analog)> Frequency Scanning” to search for the frequency you need. The analog frequency band is 5.650 GHz - 5.925 GHz, of which 5.725 GHz - 5.850 GHz are ISM frequency bands.
DJI Goggles Racing Edition User Manual The S.Bus port and PPM port on the Air Unit are only used when transmitting remote control signals. These ports don’t need to be connected if only using video downlink. There are up to 19 channels (5.8 GHz: 12 channels; 2.4 GHz: 7 channels) for digital video transmission, and each bandwidth is 10 MHz. You can manually select the transmission channel to avoid interference from other devices.
DJI Goggles Racing Edition User Manual 2. Power on the DJI OcuSync Air Unit and press the link button on the Air Unit with an appropriate tool when the linking status indicator is solid green. The indicator will turn solid red when the Air Unit is waiting for linking. 3. Power on the Goggles RE and swipe down on the touch panel with two fingers to enter the shortcut menu, then select “Racing Drone (Digital) > Linking Settings > Advanced Linking > Connect two sets of Goggles RE > Primary” and confirm.
DJI Goggles Racing Edition User Manual DJI Aircraft using OcuSync With OcuSync, the Goggles RE can be connected to the Mavic 2 series, Mavic Pro or the Phantom 4 Pro/Pro+ V2.0 wirelessly. Toggle the control mode switch of the Mavic Pro to RC mode before linking. Ensure that the DJI GO 4 app is updated to the latest version. Mavic 2 series and Phantom 4 Pro/Pro+ V2.0 currently only supports linking with Goggles RE by Standard Mode.
DJI Goggles Racing Edition User Manual Coach Mode Coach Mode is suitable for dual operator aircraft control. In this mode, the pilot using the remote controller can focus on flight, while the Goggles RE operator with a secondary remote controller can view the environment in real-time FPV for more intuitive control. By moving their head, the Goggles RE wearer can control aircraft orientation or gimbal movement.
DJI Goggles Racing Edition User Manual 5. 6. 7. 8. Press the Link button on the aircraft. Once linked, the linking status indicator will turn solid green. Select “Connect Remote Controller” and confirm in Goggles RE. Power on the auxiliary secondary remote controller and connect it with the mobile device. Launch the DJI GO 4 app and enter the camera view. Press , then select “Remote Controller Linking > Secondary Remote Controller,” for successful linking in a few seconds.
DJI Goggles Racing Edition User Manual Linking Method 1. Put on the Primary Goggles RE and power on. 2. Use the touch panel to enter “Tools > Settings > Linking Settings”. 3. Select “Advanced Linking > Connect two sets of Goggles RE > Primary/Remote Controller” and confirm. The linking status indicator will go solid red to wait for linking. 4. Press the Link button on the aircraft. Once linked, the linking status indicator will turn solid green. 5.
DJI Goggles Racing Edition User Manual Screen Main Screen The main screen of the Goggles RE and functions are described as follows: 1 2 3 IN-FlIGHT (GPS) 4 5 6 7 12 8 02:36 FLIGHT MODE GPS 9 10 100% Vibrations Detected in Gimbal Pitch Axis 10˚ 60% 11 12 VPS 2.5 m 17 13 VS 2.5 m s HS 10 m s D 200 M H 300 m ISO AUTO S F 2.8 EV 0.0 LIVEVIEW 720P60 16 14 15 1. Aircraft Status Indicates aircraft flight status. 2. Flight Mode Indicates current flight mode. 3.
DJI Goggles Racing Edition User Manual 11. Prompt Message Shows warning messages. Swipe up or down to select and tap to delete prompts. 12. Intelligent Flight Modes Tap to select TapFly, ActiveTrack, Terrain Follow, Tripod, and other intelligent flight modes. 13. Tools Tap to set the settings of the Goggles RE and select Auto Takeoff/Landing, HDMI video playback, or flight photos/videos playback.
DJI Goggles Racing Edition User Manual Digital Transmission Screen 1 2.4V 2 3 4 1080P Wireless Settings Linking Settings Remote Controller Channel Camera View Settings 6 Zoom Scale Settings Brightness On-screen Display Camera Rotation Video Storage Settings Exit 5 1. Aircraft Voltage Shows the aircraft voltage read by the flight controller. 2. Live View Mode Shows the current live view resolution. 3.
DJI Goggles Racing Edition User Manual d) Camera View Settings Supports 1280×960, 1280×720, and 640×480 live view modes. e) On-screen Display Enables/disables the Image Transmission signal, Image Transmission Resolution, and Flight Attitude on-screen displays separately. f) Camera Rotation Rotates the live view and recorded video by 180° to suit special installation or shooting needs.
DJI Goggles Racing Edition User Manual confirm the target direction and wait for the icon to appear. c) Tap again to confirm the selection and the aircraft will fly in that direction. d) Press the back button on the Goggles RE to exit the current target direction or TapFly. 2. ActiveTrack a) Use the touch panel to enter “Intelligent Flight Mode > ActiveTrack”. b) Move your head to control the cursor in the Goggles RE and then tap the touch panel to select the target subject.
DJI Goggles Racing Edition User Manual Flight Photos and Videos Select “Tools > Playback” to enter the playback page for flight photos and videos (shot by DJI aircraft only), or demo videos. IN-FlIGHT (GPS) FLIGHT MODE GPS Local Storage 12 Aircraft Storage 02:36 100% 60% Demo Videos VPS 2.5 m VS 2.5 m s HS 10 m s D 200 M H 300 m ISO AUTO S 30 F 2.8 EV 0.
DJI Goggles Racing Edition User Manual Ensure to use the Panorama feature when the aircraft’s motors are turned off. When using the Goggles RE with the Mavic Pro, if a user plays the video from aircraft storage instead of having a live view, then this video will be displayed on all devices synchronously. DO NOT play aircraft storage videos during flight to ensure safety. Video Play Goggles RE support both Micro SD card and HDMI connection to view HD video. For HD video playback: 1.
DJI Goggles Racing Edition User Manual DO NOT charge the Goggles RE when it is powered on to ensure safety. When using a non-standard charger, the maximum output voltage must not exceed 12 V. The Goggles RE battery is located in the headband. You can connect the headband individually to the charger for charging. The battery is fully charged when the charging status indicator turns off. A standard charger is recommended for charging. It takes approximately four hours to fully charge the battery.
Upgrading Firmware DJI Assistant 2 Use DJI Assistant 2 to upgrade the Goggles RE. 1. Power on the Goggles RE and connect them to a computer with a Micro USB cable. 2. Launch DJI Assistant 2 and login with a registered DJI account. 3. Select “Goggles RE” and click “Firmware Upgrade” on the left-hand side. 4. Select the firmware version required. 5. DJI Assistant 2 will download and upgrade the firmware automatically. 6. Restart the Goggles RE after the firmware upgrade is complete.
Cleaning and Maintenance Be sure to unplug the charger from the power outlet before cleaning and ensure that there are no cables connected. Cleaning the Goggles RE Wipe and clean the surface of the Goggles RE with a soft clean cloth. To clean the facial pad, first drag it from the left or right side to the inside, then detach the other parts. Run water over the facial pad, then wipe it with a soft, dry cloth until it is completely dry.
DJI Goggles RE Weight (Typical) Goggles RE Body: 502 g Headband: 500 g Dimensions Goggles RE Body: 195×155×110 mm Headband (folded): 255×205×92 mm Screen Size 5 inch×2 Screen Resolution 3840×1080 (single screen: 1920×1080) Refresh Rate 60 Hz FOV 85° (single screen) Interpupillary Distance Range 58 – 70 mm Communication Frequency 2.4 GHz / 5.8 GHz Transmitter Power (EIRP) 2.4 GHz: 25.5 dBm (FCC); 18.5 dBm (CE); 19 dBm (SRRC) 5.8 GHz: 25.5 dBm (FCC); 12.5 dBm (CE); 18.5 dBm (SRRC) Max.
DJI Goggles Racing Edition User Manual DJI OcuSync Air System Weight Air Unit: 43.7 g; Camera (cable included): 18.2 g Pagoda Antenna: 9.4 g; Cylindrical Antenna: 9.4 g; Dipole Antenna: 4.2 g Dimensions Air Unit: 72 × 33 × 14 mm Camera: 29.4 × 28.2 × 22.6 mm Communication Frequency 2.4 GHz / 5.8 GHz Transmitter Power (EIRP) 2.4 GHz: 22.5 dBm (FCC); 18.5 dBm (CE); 19 dBm (SRRC) 5.8 GHz: 25.5 dBm (FCC); 12.5 dBm (CE); 25.5 dBm (SRRC) Live View Modes and Min.
DJI Support http://www.dji.com/support This content is subject to change. Download the latest version from www.dji.com/dji-goggles-re If you have any questions about this document, please contact DJI by sending an email to DocSupport@dji.com. DJI is a trademark of DJI. Copyright © 2019 DJI All Rights Reserved.
DJI GOGGLES Racing Edition Quick Start Guide 't~~ A fl :f:ljjHlJ 't~~AF~1~i¥J ~ AErE 7ro 1 c Kurzanleitung Gufa de inicio rapido Guide de demarrage rapide Guida di avvio rapido Snelstartgids Guia de infcio rapido Vl .
OJI Support OJI 1~:;t::;i~ OJI ~Ujsi!I OJI J!~.lp:1~ OJI Support Servicio de asistencia de OJI Service client OJI Assist enza OJI OJl- o ndersteuning Suporte OJ I http://www.dJl.com.lsupport DJI incorporates HDMI™ technoO ogy. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks o r registered trademarks of HDMI Licensing LLC in the United States and other countries.
Contents [filJ Quick Start Guide 4 (CHS] ~~Aflffiiti 12 (CHT) ~iiAr,m~ 20 ~ ~ AE~E 7~0IC 28 00 Kurzanleitung 36 @] Guia de inicio rapido 44 ~ Guide de demarrage rapide 52 QO Guida di avvio rapido 60 00 Snelstartgids 68 0J Guia de inicio rapido 76 3
OJI Goggles Racing Edition EJ DJI Goggles Racing Edition (hereafter abbreviated as "DJI Goggles RE") are equipped with high-performance displays and an ultra-low latency video downlink for use with DJI™ aircraft, giving you a real-time First Person View (FPV) aerial experience. DJI Goggles RE can also be used to display HD videos, bringing you a more immersive high-definition viewing experience.
OJI OcuSync Air Unit I 1. Camera Port* Connects to the OJI OcuSync Camera. 2. S.Bus Port Connects with the 3-in-1 Cable (Power, S.Bus, UART) , and connects to the power, flight controller, and OSD port based on the information below. RED: Power BLACK: Power GND WHITE: UART RX (Connects to OSD TX) GRAY: UART TX (Connects to OSD RX) BROWN: Signal GND YELLOW: S.Bus (Connects to Flight Controller RX) 3. Micro SD Card Slot Insert the Micro SD card to store the recorded video.
Installation and Wearing El ~lick ~ Insert the Headband Buckle into the slot above the OJI Goggles RE body. e. Wear the OJI Goggles RE and adjust the Headband. Adjust interpupillary distance. } Flip the OJI Goggles RE body to see outside.
Check the Battery Level and Charging ~ ® @:00:0 ,,, ~ Low e-Baltely Level+ High Press once to check the battery level. Press once, then again and hold to turn on/off. 8-------U-------@ Power Outlet USB Charger Micro USB Port 100-240V The Battery is fully charged when the Charging Status Indicator or the Battery Level Indicators turn off.
Digital Video Transmission In addition to install the Pagoda antenna (SMA interface) to the SMA Port of the OJI Goggles RE, you will also need to install the OJI OcuSync Air System on a third-party racing drone to work with the goggles. Refer to the illustration below to mount and connect the modules onto your aircraft. ------- Devices that support PPM signals (e.g.
Activation and Connection If you do not have a MAVIC™ series aircraft, please download the latest DJI Assistant 2 to activate them." When the DJI OcuSync Air Unit is powered on, connect it to your PC and run DJI Assistant 2 to activate it.* • Ensure to update both the OJI Goggles RE and the Air Unit to the latest version after activation for the best performance. Ensure all devices are powered on and that the aircraft is linked with the remote controller.
Controls I t Single Finger Touch / 5D Button* • Swipe to scroll on the menu • Tap to confirm Two Fingers Touch • Swipe forward/backward to unlock/ lock the touch panel • Swipe upward/downward to exiVenter the shortcut menu (Q) Fn Back Button / C2 Button* Function Button / C1 Button* Press to return to the previous menu, or exit the current Intelligent Flight Mode. OJI aircraft: Press to display the cursor. then swipe forward/backward with one finger to zoom in or zoom out.
I OJI OcuSync Air System Weight Air Unit: 43.7 g; Camera (cable included): 18.2 g Pagoda Antenna: 9.4 g; Cylindrical Antenna: 9.4 g; Dipole Antenna: 4.2 g Dimensions Air Unit: 72 x 33 x 14 mm Camera: 29.4 x 28.2 x 22.6 mm Communication Frequency Transmitter Power (EIRP) 2.4 GHz/ 5.8 GHz 2.4 GHz: 22.5 dBm (FCC); 18.5 dBm (CE); 19 dB~ (SRRC) 5.8 GHz: 25.5 dBm (FCC); 12.5 dBm (CE); 25.5 dBm (SRRC) Live View Modes and Min. Latency 960p50: 70 ms; 720p60: 60 ms; 480p50: 50 ms Max.
DJI GOGGLES Racing Edition In the Box 1W~~l~ 1W~;lm'.
(El Standard Package Check that all of the following items are in your package. If any item is missing , please contact OJI™ or your local dealer. ICHS I tiieEf4: ~ffl~F~~W.•~•F~ffi~~~~ffi~~~ffiffm~ o ~ft~~.•G * OJI™ ~3itMtI!i:ffi o IcHr I ••naf4: ~~~~ffi~i:p~~ff~9UJifrft~IWo ;gft~0-'1f1aJ~I~, ~~~~g OJI™ ~~itB 1tI!i:ffi o ~ H~ iiff1IAI q:; .,i~~OI IlH7l}~IOII 2~ ~Oi ~~XI ~<215~~.A.l.2. .,i~~OI 5~q2.~£ fil~ DJI™ EE~ ~XI ~□H~Oll gQlcS~{J.A.12..
X 1 OJI Goggles Body Headband OJI Goggles .:E.~ ~ffl OJI Goggles .:E.ffl m~m OJI Goggles ~x➔I tiil C it!! C OJI Goggles-Gehause Kopfband OJI Goggles Banda de sujeci6n Bo7tier OJI Goggles Bandeau serre-tete Corpo dei OJI Goggles Archetto OJI Goggles-behuizing Hoofdband Corpo dos OJI Goggles Banda para a cabec;a x2 Pagoda Antenna (SMA interface) Reversed SMA Connector ~tl~~ ( SMA tlD ) )!tl~t~ (SMA iltli$ ) SMA &J.&t1$~tl~ II~.:ilq <2._I-Eilq (SMA '2.
X 1 Charger (Varies by region) Wire Clip Jt~H ( ~~Uit!ll&~pfi,f:[Ej ) Jt~H (-~filllit!l~~,6fr,f:[Ej ) 8{!7 I (:1:IQ!Oil !42.r q~) ~~ .
X D Manuals · In the Box · Disclaimer and Safety Guidelines · Quick Start Guide ::It~ -~&I~~ · se,~~B~f[l~:i:~{'F!lifsI · tRiiAflm~ :'.lt{i -~&l;~M • !€.J!llfBJ:JW'ti':£m!9ntt •·tRiiAr9rn~ ~~Ai -,1-{:i~~~Ai · .:ilAI Af~ '1,1 <2!'~ 7f0IE. · -2j ~Ef.!§. 7f0IE.
Cylindrical Antenna Dipole Antenna ~~~~ f~l&-=f~~ f~fo]-=f~tj qoJ~~EilLr Ill~~~ ~~~ ~EilLr Zylindrische Antenne Dipolantenne Antena cilfndrica Antena dipolo Antenne cylindrique Antenne dipole Antenna cilindrica Antenna a dipole Cilindrische antenne Tweepolige kabel Antena cilindrica Antena dipolo x1 [Iii cq:r:::(IC: = = == = == =® MMCX to MMCX Cable MMCX to SMA Cable MMCX ~HJ~$~tl~ MMCX $~ SMA iitl~ MMCX ~HJ~fiQtitj MMCX Q SMA il}jtj MMCX - MMCX iJJIOI ~ MMCX - SMA iJJIOI~ MMCX/M
X 1 x1 n PPM Cable PPM ii:ti~ PPM il:ti~ PPM ~IOI~ PPM-Kabel Cable PPM CAble PPM Cavo PPM PPM-kabel Cabo PPM Mono 3.5mm Jack Plug to Mono 3.5mm Jack Plug Cable 3.5mm !'.t1ffffl.t:l,I,*~ 3.5mm !'.t1ffnfE.I_~ 3.5mm ~ff1ffi~Q 3.5mm ~~1m~U~ 2~ 3.5mm ~ ~2:l 7 - 2~ 3.5mm ~ it2:l:J.
Optional Items iiJi&E# iiJIIE# &-M ·~ DJI OcuSync Air System DJI OcuSync ~~~~t/e DJI OcuSync ~~~~fS!t Zubehor DJI OcuSync Oll<>i Al~~ Elementos opclonales DJI OcuSync-Luftsystem Composants en option Componenti opzionali Sistema aereo OcuSync de DJ I Optionele items Sistema d'aria DJI OcuSync ltens opcionais DJI OcuSync-luchtsysteem Systeme aerien DJI OcuSync Sistema Aereo DJI OcuSync x1 Backpack Camera ~~fil ffiffL ~~~~§, ffitl ~l!:!j 7~Dllc~ Rucksack Mochila Kamera Camara Camera Te
X 1 X • 1 31 Air Unit 3 in 1 Cable (Power, S.Bus, UART) 7C~~ffti~ 7C~~~ffi O!IOi ~'A! 3-i!Eti~ ( ~;llil, -3-:ifti!@ ( ~;llil, 3 in 1 71101 ~ (ti~. 5-Bus, UART) Luftgerat 3-in-1-Kabel (Stromversorgung, S.Bus, Unidad aerea UART) Unite aerienne Cable 3 en 1 (alimentaci6n, Bus serie, Unita d'aria UART) Luchteenheid CAble 3-en-1 (alimentation, S.Bus, UART) Unidade aerea Cavo 3 in 1 (alimentazione, S-Bus, UART) S.Bus, UART) S.
[!]~[!] - http://store.dji.com Visit the Official OJI Online Store for more optional items. 7Nr~~i:iJ~i'iiWt:, ~i,J:jfoJ OJI '§nifljJiit. i'l'XllfNBl!~i:iJiHi'icf!l=, fflliiH1 OJI '@'~Jfljf.s. ::i:tAil~ ~t! ~~g ~-!,J DJI Online StoreOllA1 li't!isf~Al2.. Weiteres ZubeMr linden Sie im offiziellen OJI-Onlineshop. Visite la tienda en linea oficial de OJI para consultar mas elementos opcionales. Visitez la boutique en ligne OJI officielle pour decouvrir !'ensemble des composants en option.
DJI GOGGLES SERIES DISCLAIMER AND SAFETY GUIDELINES §;e.~;::asft.lf□sc~ti11=rni:l 1 §;e.~~Bft.l~sc~t~~7Jit ~•r ~~sJ::U~~tL~-t-@15-1 ~-5-1::,, HAFTUNGSAUSSCHLUSS UND SICHERHEITSVORSCHRIFTEN RENUNCIA DE RESPONSABILIDAD Y DIRECTRICES DE SEGURIDAD CLAUSE D'EXCLUSION DE RESPONSABILITE ET CONSIGNES DE SECURITE LIMITAZIONI DI RESPONSABILITA E DIRETTIVE SULLA SICUREZZA DISCLAIMER EN VEILIGHEIDSRICHTLIJNEN ISENC.
Contents ~ Disclaimer And Safety Guidelines !CHSJ !€.~JEB~f□3i~tlf'f=ffis I 4 9 ICHT) !€.•RB~W3i~ffi~15it 13 0 ~-•liasJ:U~~,t'.
Disclaimer and Warning • This product is NOT a toy and is not suitable for young children. Adults should keep OJI Goggles out of the reach of children and exercise caution when operating this product in the presence of children. While the product adopts advanced technology, inappropriate use of the product could result in personal injury or property damages. Please read the materials associated with the product before your first use of the product.
indirectly from the use of this product. The user shall observe safe and lawful practices including, but not limited to, those set forth in these Safety Guidelines. OJI is a trademark of SZ OJI TECHNOLOGY CO., LTD. ("OJI") and its affiliated companies. Names of products, brands, etc. appearing in this document are trademarks or registered trademarks of their respective owner companies.
• excessive sweating increased salivation, impaired sense of balance, impaired handeye coordination, or other symptoms similar to motion sickness. Do not use the • product if you are sick, fatigued, under the influence of intoxicants/drugs, or are not feeling generally well, as it may exacerbate your condition. Take regular breaks from using the product to mitigate health risks. 3.
eyes or sin. OJI Goggles should be cleaned between each use with skin-friendly nonalcoholic antibacterial wipes and with a dry microfiber cloth for the lenses. 14. Stop using OJI Goggles if you notice swelling, itchiness, skin irritation or other discomfort of your skin that is in contact with the product. If symptoms persist, please contact a doctor. 15. OJI Goggles are equipped with integrated speakers.
• children and pets away from the cable. Do not allow them to bite or chew on the cable. Make sure the cable is not choking . 9. When not using DJI Goggles, keep it away from heat. liquid, fire and direct sunlight. 10. Do not use DJI Goggles if any part or component is broken or damaged. Do not attempt to repair any part of the device yourself. Please contact OJ I or recommended service center for repair. Additional Safety Guidelines for OJI Goggles Racing Edition 11.
If you have any questions about this document, please contact OJI by sending a message to DocSupport@dji.com. YC.BZ.5S000129.0l Printed in China.
