Owner's Manual

Specications

Weight Air Unit (camera included): 45.8 g

Antenna: 3.74 g (MMCX straight);

3.9 g (MMCX elbow);

6 g (reverse polarity female SMA)

Dimensions Air Unit: 44×37.8×14.4 mm

Camera: 27.4×21.1×20.1 mm

Coaxial Cable: 100 mm

Operating Frequency 5.725-5.850 GHz

Transmitter Power (EIRP) FCC/SRRC: <30 dBm;

CE: <14 dBm

Min. Latency (end-to-end) Low Latency Mode (720p 120fps):

<28 ms;

High Quality Mode (720p 60fps):

<40 ms

Max. Transmission Distance FCC/SRRC: 4 km; CE: 0.7 km;

Video Format MP4 (Video format: H.264;

Audio format: AAC-LC)

I/O Interface USB-C, MMCX, 3-in-1 port,

microSD card slot

Supported Flight

Control System

BetaFlight

Operating

Temperature Range

0° to 40° C (32° to 104° F)

Input Power 7.4-17.6 V

Camera Sensor: 1/3.2” CMOS; Effective

Pixels: 4 M

Lens: 2.1 mm, f/2.1

Shutter: Rolling shutter

ISO: 100-25600

FOV: 150° (D); 122° (H); 93° (V)

* When ready to link, the devices will give the following indication:

Air unit: the linking status indicator turns solid red.

Goggles: the goggles beep continually.

Remote controller: the remote controller beeps continually and

the status indicator blinks blue.

1. Power on the air unit and the DJI FPV Remote Controller.

2. Press the link button on the air unit, and then press the record

button, C button, and right dial on the remote controller

simultaneously.*

3. Both the linking status indicators turn solid green when

successfully linked.