DJI FPV AIR UNIT Quick Start Guide 快速入门指南 快速入門指南 クイックスタートガイド 퀵 스타트 가이드 Kurzanleitung Guía de inicio rápido Guide de démarrage rapide Guida rapida Snelstartgids Guia de início rápido Guia de Início Rápido Краткое руководство пользователя v1.0 2019.
EN Disclaimer Congratulations on purchasing your new DJI™ product. The information in this document affects your safety and your legal rights and responsibilities. Read this entire document carefully to ensure proper configuration before use. Failure to read and follow instructions and warnings in this document may result in serious injury to yourself or others, damage to your DJI product, or damage to other objects in the vicinity.
Connection Refer to the illustration below to mount and connect the air unit to a racing drone. 3-in-1 Cable (Power, DJI HDL, UART) RED: Power (7.4-17.6 V) BLACK: Power GND WHITE: UART RX (Connects to Flight Controller OSD TX, 0-3.3 V) GRAY: UART TX (Connects to Flight Controller OSD RX, 0-3.3 V) BROWN: Signal GND YELLOW: DJI HDL (Connects to Flight Controller S.Bus, 0-3.3 V) An electric soldering iron and soldering tin are required for connection.
B. 1. Power on the air unit and the DJI FPV Remote Controller. 2. Press the link button on the air unit, and then press the record button, C button, and right dial on the remote controller simultaneously.* 3. Both the linking status indicators turn solid green when successfully linked. * When ready to link, the devices will give the following indication: Air unit: the linking status indicator turns solid red. Goggles: the goggles beep continually.
Compliance Information FCC Compliance Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/ EU. A copy of the EU Declaration of Conformity is available online at www. dji.com/euro-compliance EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany Declaración de cumplimiento UE: SZ DJI TECHNOLOGY CO., LTD.
DJI Support DJI 技术支持 DJI 技術支援 DJI サポート DJI 고객지원 DJI Support Servicio de asistencia de DJI Service client DJI Assistenza DJI DJI-ondersteuning Assistência da DJI Suporte DJI Техническая поддержка DJI https://www.dji.com/support This content is subject to change. Download the latest version from https://www.dji.com/fpv DJI is a trademark of DJI. Copyright © 2019 DJI All Rights Reserved. 1HKDSKGS02TY Printed in China.
