User Manual- M100

Using the SDK

DJI Mobile API and Onboard API are supported by the Matrice 100. Users can use these APIs to

develop their own applications to monitor and control their aircraft. Visit the DJI SDK page on the DJI

Developer website (https://developer.dji.com) for information on using these APIs.

Flight

Once pre-ight preparation is complete, it is recommended to use the ight simulator to learn how to

y safely. Ensure that all ights are carried out in an open area.

Flight Environment

1. Do not use the aircraft in adverse weather conditions including raining, snowing, fog, and wind

speeds exceeding 10 m/s.

2. Only y in open areas. Tall buildings and steel structures may affect the accuracy of the compass

and the GPS signal.

3. Avoid ying near obstacles, crowds, high voltage power lines, trees and bodies of water.

4. Avoid ying in area with high levels of electromagnetism, including mobile phone base stations and

radio transmission towers.

5. Aircraft and battery performance is subject to environment factor such as air density and

temperature. Be very careful when ying over 14700 feet (4500 meters) above sea level as the

battery and aircraft performance may be reduced.

6. The Matrice 100 cannot operate in P-Mode within the Earth’s polar regions.

Flight Limits and No Fly Zones

Flight limits on height and distance can be set.

Unmanned aerial vehicle (UAV) operators should abide by the regulations from self-regulatory

organizations such as the ICAO (International Civil Aviation Organization), the FAA and their local

aviation authorities. For safety reasons, flight limits are enabled by default to help users use this

product safely and legally.

When operating in P-Mode, the height limit, distance limit and No Fly Zones work together to monitor

ight. In A-Mode, only the height limit prevents the aircraft from going above 120 meters.

Maximum Height and Radius Limits

Users can change the maximum height and radius limits in the DJI GO app. Once complete, your

Matrice 100 will y in a restricted cylinder that is determined by these settings. The tables below show

the details of these limits.

Max Height

Max Radius

Home Point

Height of aircraft when powered on